PRODUCTOS


POE PV 8660 | POE Polymer for Long-Lasting Solar Sealants
Estructura del producto
POE Polymer Overview - Dow POE PV 8660
Under the "dual carbon" policy and the global clean energy wave, the photovoltaic industry is entering a stage of rapid development. However, the aging and cracking of sealing materials, high water and air permeability, and the decline in insulation performance have always been the key problems restricting the lifespan and performance of photovoltaic modules. Especially, once the sealing of the frame and the packaging structure fails, it will not only affect the power generation efficiency, but also may bring potential safety hazards.
01 | Focusing on photovoltaic applications, we specialize in researching sealing pain points
Traditional materials such as EVA and TPO still have shortcomings in terms of weather resistance, structural toughness and sealing durability. Dow POE polymer PV 8660 is precisely a high-performance ethylene-octene copolymer material developed specifically for the demand of photovoltaic sealants, and it has:
✔ Extremely low water vapor transmission rate, significantly delaying water vapor erosion;
✔ 1100% ultra-high elongation rate, maintaining long-term flexible sealing without cracking;
✔ 1E15 Ω.cm volume resistance, significantly enhancing electrical insulation reliability;
✔ Excellent heat aging resistance, UV resistance and weather resistance, suitable for harsh outdoor environments.
02 | Data supports the technical advantages of POE Polymer PV 8660
・Good light transmittance and no impact on the power generation efficiency of the components;
・It has a wide temperature resistance range, with a melting temperature of 59°C and a glass transition temperature as low as -53°C, adapting to cold and hot cycles.
・Outstanding mechanical properties: Tear strength 37.1 KN/m, Shore hardness A66, ensuring a balance between structural strength and flexibility.
Comportamiento mecánico | Condición | Estándar | Valor | Unidad | |||
Alargamiento | Rotura de 510 mm/min Moldeado por compresión | Norma ASTM D638 | 1100 | % | |||
Módulo de flexión | Norma ASTM D790 | 10.8 | MPa | ||||
Resistencia a la tracción | Rotura de 510 mm/min Moldeado por compresión | Norma ASTM D638 | 5.70 | MPa | |||
Módulo de tracción | Moldeado por compresión | Norma ASTM D638 | 2.30 | MPa | |||
Resistencia al desgarro | Muere C | ASTM D624 | 37.1 | KN/m | |||
Térmico | Condición | Estándar | Valor | Unidad | |||
Temperatura de fusión | DSC 10 °C/min | MÉTODO INTERNO | 59.0 | °C | |||
Temperatura de transición vítrea | MÉTODO INTERNO | -53.0 | °C | ||||
Temperatura de cristalización | DSC | MÉTODO INTERNO | 44.0 | °C | |||
Temperatura de ablandamiento Vicat | Norma ASTM D1525 | 37.0 | °C | ||||
Propiedad fisica | Condición | Estándar | Valor | Unidad | |||
Densidad | Norma ASTM D792 | 0.872 | gramos/cm³ | ||||
Índice de fusión | 190°C 2,16 kg | Norma ASTM D1238 | 4.8 | g/10min | |||
Viscosidad Mooney | ML1+4 121°C | ASTM D1646 | 8 | MU | |||
Propiedades electricas | Condición | Estándar | Valor | Unidad | |||
Resistividad volumétrica | MÉTODO INTERNO | 1E15 | Ω.cm | ||||
Dureza | Condición | Estándar | Valor | Unidad | |||
Dureza Shore A | 1s Moldeado por compresión | ASTM D2240 | 66 | ||||
Dureza Shore D | 1s Moldeado por compresión | ASTM D2240 | 17 |
03 | Not only in photovoltaics, POE polymers help upgrade materials in multiple industries
Relying on its excellent electrical performance and processing adaptability, POE PV 8660 is also applicable to:
・Flexible electronics, automotive electrical structures
・Industrial flexible packaging, weather-resistant structural components;
・Plastic modification and high-performance injection molding applications.
04 | Stable supply and prompt response to diverse purchases from the demand side
Our company has always kept Dow's original POE polymer PV 8660 in stock to support photovoltaic enterprises, modification plants and end manufacturers:
・Small-batch test materials
・Technical parameter matching consultation
・Stable batches and prompt supply of large quantities.
Reduce development costs, ensure project progress, and seize new opportunities in the green energy market.
Photovoltaic sealing is related to the stability of the module and the power generation efficiency. POE polymer PV 8660 is precisely the ideal choice for improving the reliability of sealing, extending the service life and reducing the maintenance cost. If you need technical materials or samples, please feel free to contact our company for more information.
【Recomendaciones relacionadas】
POE LC670: The Flexible Solution to Tackle Plastic Brittleness and Meet Market Demands Más información>
POE 8400: Advanced Polyolefin Elastomer Empowering Lightweight and Durable Solutions Más información>
POE 3401: High Compatibility Polyolefin Elastomer for Flexible Films and PP Modification Más información>