PRODUCTOS


BASF Ultrason® S 3010 | Heat-Resistant Polysulfone for Labware
Estructura del producto
What is Ultrason® S 3010
BASF Ultrason® S 3010 (PSU 3010) is a high-viscosity Polysulfone particle, specially designed for injection molding processing. It combines chemical resistance, stress crack resistance and toughness, and is suitable for application scenarios that require long-term reliability, such as laboratory equipment and household items. For manufacturers pursuing stable performance and processing efficiency, ultrason s 3010 offers a balanced and sustainable solution.
01 | Material highlights and procurement value
From the perspective of purchasers, the advantages of Ultrason® S 3010 lie not only in its physical parameters but also in its ability to address the pain points in practical applications:
Chemical resistance and stress crack resistance
・In laboratory equipment and chemical environments, materials are prone to erosion by cleaning agents, acids, alkalis or organic solvents. The chemical resistance and stress crack resistance of PSU 3010 ensure that the product can maintain structural integrity during long-term use and will not fail prematurely due to stress concentration.
・Solve the problem: Reduce product scrapping and after-sales costs caused by cracking.
Buena resistencia mecánica y tenacidad.
・The tensile strength is 75 MPa, and the impact toughness can still maintain 6.0 kJ/m² at a low temperature (-30°C), demonstrating the material's stability under extreme conditions.
・Problem-solving: Ensure that the products remain safe and reliable in the event of drops, impacts or cold environments, and reduce customer complaints.
Excelente estabilidad térmica
・The heat distortion temperature (1.8MPa) reaches 177°C, and the long-term service temperature can be maintained at 155°C.
・Solution: Experimental equipment and household appliances suitable for high-temperature environments, avoiding precision failure caused by thermal deformation.
Electrical insulation and flame retardancy
・The volume resistance is as high as 1E15 Ω·cm, the insulation strength is 37 kV/mm, and the flame retardant grade is UL94 HB.
・Solution: Provide stable insulation protection for electrical components and laboratory instruments to enhance usage safety.
Adaptabilidad del procesamiento
・The melt index (360°C, 10kg) is 40 cm³/10min, with excellent fluidity and suitable for precision injection molding.
・Solve the problem: Enhance production efficiency and reduce the defective rate during the processing.
02 | BASF Ultrason® S 3010 Data Sheet
Propiedades electricas | Condición | Estándar | Valor | Unidad | |||
CTI | IEC 60112 | 125 | V | ||||
Dieléctrico | Fortaleza | CEI 60243 | 37 | kilovoltios/mm | |||
Dieléctrico | Constante 100 Hz | IEC 60250 | 3.1 | ||||
Dieléctrico | Constante | IEC 60250 | 3.1 | ||||
Disipación | Factor de 100 Hz | IEC 60250 | 8 | ||||
Disipación | Factor 1 MHz | IEC 60250 | 64 | ||||
Superficie | Resistividad | CEI 60093 | 1E+15 | Ω | |||
Volumen | Resistividad | CEI 60093 | 1E+13 | Ω.cm | |||
Inflamabilidad | Condición | Estándar | Valor | Unidad | |||
Fuego | Clasificación de todos los colores 0,75 mm | UL94 | media pensión | ||||
Fuego | Clasificación Todos los colores 1,5 mm | UL94 | media pensión | ||||
Fuego | Clasificación Todos los colores 3,0 mm | UL94 | media pensión | ||||
Dureza | Condición | Estándar | Valor | Unidad | |||
Pelota | Indentation Hardness | ISO 2039 | 135 | MPa | |||
Comportamiento mecánico | Condición | Estándar | Valor | Unidad | |||
Charpy | Impacto de muesca -30°C | ISO 179 | 6 | kJ/m² | |||
Charpy | Impacto de muesca 23°C | ISO 179 | 5.5 | kJ/m² | |||
Charpy | Impacto sin muesca -30°C | ISO 179 | NÓTESE BIEN | kJ/m² | |||
Charpy | Impacto sin muesca 23°C | ISO 179 | NÓTESE BIEN | kJ/m² | |||
Alargamiento | Rendimiento 23°C | ISO 527 | 6 | % | |||
Izod | Muesca de impacto -30°C | ISO 180 | 6 | kJ/m² | |||
Izod | Impacto de muesca 23°C | ISO 180 | 5.5 | kJ/m² | |||
De tensión | Módulo 23°C | ISO 527 | 2550 | MPa | |||
De tensión | Resistencia Rendimiento 23°C | ISO 527 | 75 | MPa | |||
Propiedad fisica | Condición | Estándar | Valor | Unidad | |||
Densidad | ISO 1183 | 1.23 | gramos/cm³ | ||||
Derretir | Índice 360°C 10kg | ISO 1133 | 40 | cm³/10min | |||
Contracción | Fluir | ISO 294 | 0.7 | % | |||
Contracción | xFlujo | ISO 294 | 0.74 | % | |||
Agua | Absorción 50RH | ISO 62 | 0.3 | % | |||
Agua | Absorption Saturation | ISO 62 | 0.8 | % | |||
Térmico | Condición | Estándar | Valor | Unidad | |||
CLE | Fluir | MÉTODO INTERNO | 5.3E-5 | cm/cm/°C | |||
HDT | 1,8MPa | ISO 75 | 177 | °C | |||
UL | Condición | Estándar | Valor | Unidad | |||
Arco | Resistencia | ASTM D495 | 5 | SOCIEDAD ANÓNIMA | |||
Comparativo | Índice de seguimiento | IEC 60112 | 3 | SOCIEDAD ANÓNIMA | |||
Dieléctrico | Fortaleza | Norma ASTM D149 | 32 | kilovoltios/mm | |||
Dimensional | Estabilidad | UL746 | 0.0 | % | |||
Hola | TODOS 0,75 mm | UL 746A | 4 | SOCIEDAD ANÓNIMA | |||
Hola | TODOS 1,5 mm | UL 746A | 4 | SOCIEDAD ANÓNIMA | |||
Hola | TODOS 3,0 mm | UL 746A | 0 | SOCIEDAD ANÓNIMA | |||
Alta Velocidad | UL 746A | 3 | SOCIEDAD ANÓNIMA | ||||
HWI | TODOS 0,75 mm | UL 746A | 4 | SOCIEDAD ANÓNIMA | |||
HWI | TODOS 1,5 mm | UL 746A | 3 | SOCIEDAD ANÓNIMA | |||
HWI | TODOS 3,0 mm | UL 746A | 2 | SOCIEDAD ANÓNIMA | |||
RTI | Eléctrico TODO 0,75 mm | UL 746B | 155 | °C | |||
RTI | Eléctrico TODOS 1,5 mm | UL 746B | 155 | °C | |||
RTI | Eléctrico TODO 3.0mm | UL 746B | 155 | °C | |||
RTI | Imp TODO 0,75 mm | UL 746B | 130 | °C | |||
RTI | Diablillo TODO 1,5 mm | UL 746B | 130 | °C | |||
RTI | Diablillo TODOS 3,0 mm | UL 746B | 130 | °C | |||
RTI | Str TODOS 1,5 mm | UL 746B | 155 | °C | |||
RTI | Tira TODOS 3,0 mm | UL 746B | 155 | °C | |||
UL | Clasificación de llama TODOS 0,75 mm | UL94 | media pensión | ||||
UL | Clasificación de llama TODOS 1,5 mm | UL94 | media pensión | ||||
UL | Clasificación de llama TODOS 3,0 mm | UL94 | media pensión | ||||
Volumen | Resistividad | Norma ASTM D257 | 1E+12 | Ω.cm |
03 | Technical process and processing compatibility
Ultrason® S 3010, as a high-viscosity PSU, is specially optimized for injection molding processes and features the following characteristics:
・Forming temperature range: It is recommended to carry out melting processing at 340-380° C. The mold temperature is suggested to be maintained at 160-180°C to ensure dimensional stability.
・Screw design suggestion: High-temperature resistant screw materials should be adopted to prevent material degradation at high temperatures.
・Mold compatibility: Suitable for forming thick-walled parts and transparent utensils, with a processing shrinkage rate of only 0.7-0.74%, which helps maintain part accuracy.
・Secondary Processability: Machining, bonding, and thermal welding are possible, facilitating post-processing in various application scenarios.
These process parameters enable buyers to better control yield and cost during mass production.
04 | Market Trends and Industry Dynamics
According to BASF's latest market news, the Ultrason® product line has seen significant growth in recent years in medical and laboratory equipment, heat-resistant consumer goods, and power tool components. In particular, in 2024, BASF announced the expansion of PSU production capacity in Germany and Asia to meet the rapidly growing demand for high-temperature-resistant transparent plastics in the downstream medical and electrical appliance industries.
・Medical and Laboratory: It can replace some glassware, reducing the risk of breakage.
・Home Appliances and Kitchenware: It is more heat-resistant and washable, meeting consumer trends for durability and safety.
・Electrical and Electronics: It meets the dual requirements of electrical insulation and high-temperature resistance.
For buyers, this means greater material supply stability and reduced future procurement risks.
05 | Customer Feedback
・A laboratory equipment manufacturer: Choosing Ultrason® S 3010 instead of traditional glass has reduced product scrap rates by 40% and significantly improved transportation safety.
・A customer in the home appliance industry stated: Using PSU 3010 for kitchen appliance housings solves the problem of plastic brittle cracking caused by long-term cleaning, extending the product lifecycle.
・An electronic device customer stated: Using it on electrical insulation components effectively reduces the risk of failure due to high temperatures or stress cracking.
These practical application feedbacks further validate the value of PSU 3010 in various industries.
06 | FAQ - Frequently Asked Questions for Buyers
Q1: What is the difference between Ultrason® S 3010 and S 2010?
A1: S 3010 is a high-viscosity grade, better suited for injection molding thick-walled and high-strength components; S 2010 has a lower viscosity and better flowability, making it suitable for complex, thin-walled products.
Q2: Is this material suitable for use with metal parts?
A2: Yes. PSU 3010's dimensional stability and heat resistance enable it to work well with metal components, and it is often used in medical devices and electrical appliances.
Q3: How does Juyuan ensure timely delivery of procurement? A3: We have a stable supply channel with BASF and have logistics partners in multiple regions, supporting both bulk purchases and flexible small-batch delivery.
Q4: Do you provide technical selection and cost optimization advice?
A4: Juyuan provides material performance comparisons, alternative material recommendations, and application case studies to help customers reduce costs while maintaining stable product performance.
07 | Similar Recommendations
In addition to Ultrason® S 3010, we also offer the following related materials:
Fabricante | Product Grade | Densidad | Melt Flow Index | Resistencia a la tracción | Alargamiento | Contracción | Temperatura de fusión | Módulo de tracción | Temperatura de deflexión térmica | Notched Izod Impact | Linear Expansion Coefficient |
BASF | 3010 NAT | 1.23 g/cm³ | 40 cm³/10min | 75 MPa | 6% | 0.70% | 330~390 °C | 2550 MPa | 177 °C | 5,5 kJ/m² | 5.3E-5 cm/cm/°C |
BASF | 3010 MR | 1.23 g/cm³ | 45 cm³/10min | 75 MPa | 5.80% | 0.70% | — | 2600 MPa | 177 °C | 5,5 kJ/m² | 5.3E-5 cm/cm/°C |
BASF | 3010 MR UN | 1.23 g/cm³ | 45 cm³/10min | 75 MPa | 5.80% | 0.70% | 330~390 °C | 2600 MPa | 177 °C | 5,5 kJ/m² | 5.3E-5 cm/cm/°C |
08 | Why choose Juyuan as your supplier?
In the global plastic raw material trade, selecting a reliable supply partner is as important as choosing the right material. Juyuan offers the following advantages:
・24 years of experience in international plastic raw material trade, familiarity with cross-border procurement processes, and the ability to quickly connect with buyers' needs.
・Flexible Supply Chain: Stable channels ensure timely delivery of BASF Ultrason® S 3010 and other engineering plastics.
・Professional Technical Support: Beyond providing materials, we also assist customers with application selection and cost optimization.
・Global Customer Base: We serve a wide range of industries, including electronics, electrical, medical, and consumer goods, with extensive experience.
【Recomendaciones relacionadas】
A Complete Guide to China’s Major Plastic Raw Material Procurement Hubs & Markets Más información>
BASF PSU 2010 | High Flowability PSU Polysulfone for Household Más información>
Americhem PSU-GF30HF High-flow PSU Resin for Injection Molding Más información>