CÁC SẢN PHẨM


Dupont PBT SK645FR NC010 | Giải quyết ba điểm đau chính của vỏ điện
Cấu trúc sản phẩm
01 | Are you encountering these tricky problems when selecting materials?
・Deformation and deterioration of the plastic housing when the equipment is overheated?
・Do you need a highly rigid structure, but are worried about the flame retardant properties?
・In precision machining, thermal expansion leads to excessive dimensions?
・Material electrical performance failure in a long term charged environment?
These are four common pain points in the design of electrical components, and DuPont PBT SK645FR NC010, a flame-retardant reinforced PBT material designed for high-performance electrical components, is a precise response to these problems.
Pain point 1: Insufficient heat resistance, structural deformation?
Dupont SK645FR NC010 adopts a 30% glass fiber reinforced formula, with a bending strength of 215 MPa and a tensile modulus of 11,000 MPa, presenting extremely high rigidity. During the injection molding process, the dimensional control is precise, and the shrinkage rate is extremely low (only 0.4% in the flow direction and 1.3% in the vertical direction). Even for complex structures, it can achieve high repeatability accuracy and structural stability, and is not afraid of the deformation trouble caused by thermal expansion and contraction.
Pain Point 2: Is it difficult to pass the flame retardant test and obtain the certification?
This material uses highly efficient halogen flame retardant additives and achieves all V-0 grades in UL94 tests at thicknesses ranging from 0.75 to 6.0mm. Combined with a hot wire temperature of 960°C and an oxygen index of 31%, it poses no pressure in resisting flame risks. It is suitable for use in electrical connectors, modules, switches, battery packs and other occasions with strict flame retardant requirements.
Pain point 3: Thermal deformation, causing precision errors?
SK645FR NC010 still performs stably at high temperatures. Its heat distortion temperature is as high as 220°C, and the Vicat softening temperature is 212° C. Combined with a low linear expansion coefficient and a stable glass fiber structure, it is not prone to bending or lifting at the edges even during long-term operation, significantly reducing the rework rate and mold errors.
Pain Point 4: Insulation failure, potential leakage hazard?
It has all the electrical performance you need. The volume resistance is as high as 1E15 Ω·cm, the insulation strength reaches 39 KV/mm, and the dielectric constant is only 3.8 (1MHz). It has also passed the UL746C outdoor f2 certification, providing reliable insulation protection even under wind and sun exposure.
Most suitable for these occasions:
Modular circuit breakers, electric energy metering enclosures
Outdoor monitoring equipment and structural components of charging piles
Electric vehicle BMS, battery pack end covers
Structural components of high-temperature industrial control equipment
02 | Material overview: Precise control of technical details
SK645FR NC010 adopts a 30% glass fiber reinforced system and is combined with halogen-based flame retardants. It not only achieves the full-thickness V-0 grade in the UL94 test, but also maintains excellent flame retardant performance even at a thickness of up to 6mm. Furthermore, its various electrical insulation properties, such as a volume resistance of 10¹⁴ Ω·cm and an insulation strength of 28KV/mm, fully demonstrate its stable and reliable protective capability in electronic components.
03 | Technical Parameters: Key Performance Indicators Precision Presentation
UL | Tình trạng | Tiêu chuẩn | Giá trị | Đơn vị | |||
CTI | Tiêu chuẩn IEC 60112 | 2 | Bộ điều khiển PLC | ||||
HẢI | Tất cả các màu 0,75mm | Tiêu chuẩn UL746A | 0 | Bộ điều khiển PLC | |||
HẢI | Tất cả màu sắc 6.0mm | Tiêu chuẩn UL746A | 0 | Bộ điều khiển PLC | |||
HVTR | Tiêu chuẩn UL746A | 2 | Bộ điều khiển PLC | ||||
HWI | Tất cả các màu 0,75mm | Tiêu chuẩn UL746A | 3 | Bộ điều khiển PLC | |||
HWI | Tất cả các màu 1.5mm | Tiêu chuẩn UL746A | 2 | Bộ điều khiển PLC | |||
HWI | Tất cả màu sắc 3.0mm | Tiêu chuẩn UL746A | 1 | Bộ điều khiển PLC | |||
HWI | Tất cả màu sắc 6.0mm | Tiêu chuẩn UL746A | 1 | Bộ điều khiển PLC | |||
RTI | Điện tử Tất cả Màu 0.75mm | UL 746B | 140 | °C | |||
RTI | Str Tất cả màu 3.0mm | UL 746B | 140 | °C | |||
RTI | Str All Color 6.0mm | UL 746B | 140 | °C | |||
Điện trở suất thể tích | ASTM D257 | 1E14 | Ω.cm | ||||
Độ ổn định kích thước | UL746 | 0.0 | % | ||||
Độ bền điện môi | ASTM D149 | 28 | KV/mm | ||||
Điện trở hồ quang | Tiêu chuẩn ASTMD495 | 5 | Bộ điều khiển PLC | ||||
Xếp hạng ngọn lửa | Tất cả các màu 0,75mm | UL94 | V-0 | ||||
Xếp hạng ngọn lửa | Tất cả các màu 1.5mm | UL94 | V-0 | ||||
Xếp hạng ngọn lửa | Tất cả màu sắc 3.0mm | UL94 | V-0 | ||||
Xếp hạng ngọn lửa | Tất cả màu sắc 6.0mm | UL94 | V-0 | ||||
Hành vi cơ học | Tình trạng | Tiêu chuẩn | Giá trị | Đơn vị | |||
Độ giãn dài | Phá vỡ | ISO 527 | 2.4 | % | |||
Độ bền uốn | ISO 178 | 215 | MPa | ||||
Mô đun uốn | ISO 178 | 9500 | MPa | ||||
Izod Un-notch Impact | 23°C | ISO 180 | 40 | kJ/m2 | |||
Izod Un-notch Impact | -30°C | ISO 180 | 40 | kJ/m2 | |||
Tác động của Izod Notch | 23°C | ISO 180 | 9 | kJ/m2 | |||
Tác động của Izod Notch | -30°C | ISO 180 | 8 | kJ/m2 | |||
Độ bền kéo | Phá vỡ | ISO 527 | 120 | MPa | |||
Mô đun kéo | ISO 527 | 11000 | MPa | ||||
Mô đun biến dạng kéo | 1 giờ | ISO 899 | 11000 | MPa | |||
Mô đun biến dạng kéo | 1000 giờ | ISO 899 | 8000 | MPa | |||
Charpy Un-notch Impact | 23°C | ISO 179 | 55 | kJ/m2 | |||
Charpy Un-notch Impact | -30°C | ISO 179 | 55 | kJ/m2 | |||
Tác động của Charpy Notch | 23°C | ISO 179 | 9 | kJ/m2 | |||
Tác động của Charpy Notch | -30°C | ISO 179 | 9 | kJ/m2 | |||
nhiệt | Tình trạng | Tiêu chuẩn | Giá trị | Đơn vị | |||
HDT | 0,45MPa | ISO 75 | 220 | °C | |||
HDT | 1,8MPa | ISO 75 | 210 | °C | |||
Nhiệt độ nóng chảy | 10°C/phút | ISO 11357 | 225 | °C | |||
SẠCH | Chảy | ISO 11359 | 3E-5 | cm/cm/°C | |||
SẠCH | xFlow | ISO 11359 | 9E-5 | cm/cm/°C | |||
Nhiệt độ làm mềm Vicat | 50°C/giờ 50N | ISO 306 | 212 | °C | |||
Tài sản vật chất | Tình trạng | Tiêu chuẩn | Giá trị | Đơn vị | |||
Sự hấp thụ nước | 2,00mm | ISO 62 | 0.3 | % | |||
Hấp thụ độ ẩm | 2,00mm | ISO 62 | 0.1 | % | |||
co ngót | Chảy | ISO 294 | 0.4 | % | |||
co ngót | xFlow | ISO 294 | 1.3 | % | |||
Tỉ trọng | ISO 1183 | 1.71 | g/cm³ | ||||
Mật độ nóng chảy | 1.49 | g/cm³ | |||||
Chỉ số tan chảy | 250°C 2,16kg | ISO 1133 | 9 | g/10 phút | |||
Chỉ số tan chảy | 250°C 5kg | ISO 1133 | 11 | cm³/10 phút | |||
Độ nhớt tương đối | Tiêu chuẩn ISO307 | 100 | cm³/g | ||||
Tính chất điện | Tình trạng | Tiêu chuẩn | Giá trị | Đơn vị | |||
CTI | Tiêu chuẩn IEC 60112 | 250 | V | ||||
Hằng số điện môi | 1MHz | Tiêu chuẩn IEC 62631-2-1 | 3.8 | ||||
Hằng số điện môi | 100Hz | Tiêu chuẩn IEC 62631-2-1 | 4.5 | ||||
Điện trở suất thể tích | Tiêu chuẩn IEC 62631 | 1E+15 | Ω.cm | ||||
Độ bền điện môi | IEC 60243 | 39 | KV/mm | ||||
Độ bền điện môi | 2.0mm 20s | IEC 60243 | 17 | KV/mm | |||
Hệ số tản nhiệt | 1MHz | Tiêu chuẩn IEC 62631-2-1 | 0.016 | ||||
Hệ số tản nhiệt | 100Hz | Tiêu chuẩn IEC 62631-2-1 | 0.003 | ||||
Điện trở bề mặt | Tiêu chuẩn IEC 62631-3-2 | 1E15 | Ω | ||||
Tính dễ cháy | Tình trạng | Tiêu chuẩn | Giá trị | Đơn vị | |||
GWFI | 0.4mm | Tiêu chuẩn IEC 60695 | 960 | °C | |||
GWFI | 3mm | Tiêu chuẩn IEC 60695 | 960 | °C | |||
GWIT | 0,75mm | Tiêu chuẩn IEC 60695 | 675 | °C | |||
GWIT | 1mm | Tiêu chuẩn IEC 60695 | 675 | °C | |||
Xếp hạng ngọn lửa | Tất cả các màu 0,75mm | UL94 | V-0 | ||||
Xếp hạng ngọn lửa | Tất cả các màu 1.5mm | UL94 | V-0 | ||||
Xếp hạng ngọn lửa | Tất cả màu sắc 3.0mm | UL94 | V-0 | ||||
Xếp hạng ngọn lửa | Tất cả màu sắc 6.0mm | UL94 | V-0 |
04 | Application field: The preferred innovative practice of PBT material
New energy vehicles: Applicable to charging interfaces, on-board power modules, connector housings, etc., meeting both electrical safety and structural strength requirements.
Thiết bị tự động hóa công nghiệp: It can be used for heat-resistant and highly flame-retardant components such as relays, distribution boxes, and PCB brackets.
Thiết bị gia dụng: such as the base of an electric iron and the power switch part, require high temperature resistance and long-term insulation performance.
5G communication components: Applicable to the shells of optical fiber transceivers and the structural skeletons of high-frequency modules.
05 | Get in touch with us
If you are looking for a PBT material for injection molding that can withstand high temperatures, be V-0 flame-retardant and have excellent dimensional stability, then DuPont SK645FR NC010 would be a solution worthy of in-depth evaluation.
If you need more technical materials, sample support or application suggestions, please feel free to contact us at any time. Click the contact button on the right side of the page, and our engineering team will provide you with service and support as soon as possible.
【Khuyến nghị liên quan】
Celanese PBT 3316: PBT thế hệ tiếp theo cho các linh kiện điện tử có độ tin cậy cao Tìm hiểu thêm>
Toray PBT 1184G-A15: PBT chống cháy gia cường cho linh kiện điện tử Tìm hiểu thêm>
Giải mã Xếp hạng Chống cháy và Điện: UL94 V-0, 5VA và PLC được Giải thích Tìm hiểu thêm>