TRANG CHỦCÁC SẢN PHẨMPOMNguyên liệu nhựa LUCEL POM FW-700A

CÁC SẢN PHẨM

Các sản phẩm

  • Nguyên liệu nhựa LUCEL POM FW-700A
  • Nguyên liệu nhựa LUCEL POM FW-700A
  • Nguyên liệu nhựa LUCEL POM FW-700A
  • Nguyên liệu nhựa LUCEL POM FW-700A
  • Nguyên liệu nhựa LUCEL POM FW-700A

Nguyên liệu nhựa LUCEL POM FW-700A

Polyoxymethylene (POM), also known as acetal or Delrin, is a high-density, highly crystalline thermoplastic engineering plastic polymerized primarily from formaldehyde. POM materials are mainly divided into POM homopolymers (POM-H) and POM copolymers (POM-K). They exhibit excellent performance in engineering applications due to their superior physical, mechanical, and chemical properties, especially their outstanding friction resistance.

Miễn phí liên hệ với chúng tôi

  • Cấu trúc sản phẩm

Polyoxymethylene (POM), also known as acetal or Delrin, is a high-density, highly crystalline thermoplastic engineering plastic polymerized primarily from formaldehyde. POM materials are mainly divided into POM homopolymers (POM-H) and POM copolymers (POM-K). They exhibit excellent performance in engineering applications due to their superior physical, mechanical, and chemical properties, especially their outstanding friction resistance.

POM is a high-density crystalline polymer without side chains, characterized by a smooth, glossy, hard, and dense surface, typically in light yellow or white color. It can be used continuously within the temperature range of -40 to 100°C, demonstrating excellent wear resistance and self-lubrication. Compared to most engineering plastics, POM has superior oil and peroxide resistance. By adding UV stabilizers, its UV resistance is also significantly enhanced.

Among the various POM materials, POM FW-700A stands out for its excellent performance parameters. This material has a tensile strength of 54 MPa, a static friction coefficient of 0.09, a dynamic friction coefficient of 0.12, and an elongation of 60%. Its Taber wear is 11 mg/1000 cycles, flexural modulus is 2250 MPa, and flexural strength is 75 MPa. The notched Izod impact strength at 23°C is 66.32 kJ/m², and the heat deflection temperature is 160°C at 0.45 MPa and 110°C at 1.8 MPa. It has a specific gravity of 1.39 g/cm³, a shrinkage rate of 2% in the flow direction and 2.2% in the perpendicular direction, and a Rockwell hardness of 75.

These properties make POM FW-700A widely used in the automotive industry, electronics and electrical appliances, and consumer goods manufacturing. In the automotive industry, it is commonly used to manufacture fuel system components, electronic parts, and door lock systems. In the electronics and electrical field, it is suitable for various precision parts and connectors of electrical appliances. In the consumer goods sector, POM FW-700A is used to produce zippers, fasteners, and watch parts, among other everyday items.

 

Hành vi cơ học Tình trạng Tiêu chuẩn Giá trị Đơn vị
Độ bền kéo Nghỉ 23°C ASTM D638 54 MPa
Hệ số ma sát Tĩnh Tiêu chuẩn ASTMD3702 0.09
Hệ số ma sát Năng động Tiêu chuẩn ASTMD3702 0.12
Độ giãn dài 23°C ASTM D638 60 %
Tiber hao mòn Tiêu chuẩn ASTMD1044 11 mg/1000cy
Mô đun uốn 23°C ASTM D790 2250 MPa
Độ bền uốn 23°C ASTM D790 75 MPa
Tác động của Izod Notch ASTM D256 71.42 kJ/m2
Tác động của Izod Notch 23°C ASTM D256 66.32 kJ/m2
nhiệt Tình trạng Tiêu chuẩn Giá trị Đơn vị
HDT Không ủ 0,45MPa ASTM D648 160 °C
HDT 1.8MPa không được ủ ASTM D648 110 °C
Tài sản vật chất Tình trạng Tiêu chuẩn Giá trị Đơn vị
Tỉ trọng ASTM D792 1.39 g/cm³
co ngót Chảy Tiêu chuẩn ASTMD995 2 %
co ngót xFlow Tiêu chuẩn ASTMD995 2.2 %
độ cứng Tình trạng Tiêu chuẩn Giá trị Đơn vị
Độ cứng Rockwell M(Tỷ lệ) ASTM D785 75

 

POM FW-7005

Click here to download TDS for LUCEL POM FW-700A

 

 

Miễn phí liên hệ với chúng tôi