PRODUCTS


Anterplas PSU 905 TFE 15 | Lubricated PSU Plastic Material
Product Struction
What is PSU Plastic Material
On the stage of high-performance engineering plastics, psu plastic material (polysulfone plastic) is widely used in electronic and electrical, automotive, medical and industrial systems due to its excellent heat resistance, dimensional stability and chemical resistance. The PSU 905 TFE 15 launched by Antep, through 30% glass fiber reinforcement + 15% PTFE filling + V-0 flame retardant modification, has achieved a balanced upgrade in mechanical, lubricating and flame retardant properties, making it an ideal material for high-demand applications.
01 | Material Core Advantages
Reinforced Structure
・30% glass fiber filling → flexural modulus 7584 MPa, tensile modulus 8964 MPa.
・Ensures the stability of complex structural components under long-term loads and high-temperature environments.
Lubricity
・15% PTFE modification significantly reduces the coefficient of friction.
・Suitable for high-friction parts such as gears, bearings and pump bodies, it can extend the service life.
Flame retardant safety
・It complies with UL94 V-0 (3.0mm) and meets the fire protection standards for electronic and electrical products.
・The synergistic effect of flame retardants and glass fibers does not sacrifice mechanical strength.
Heat resistance
・The heat distortion temperature is 182℃, and it can maintain stable performance during high-temperature operation.
Low shrinkage rate
・The shrinkage rate is only 0.10%, with high molding accuracy, reducing warpage and dimensional errors.
psu plastic material 905 TFE 15 Data Support:
Mechanical behavior | Condition | Standard | Value | Unit | |||
Elongation | ASTM D638 | 2.0~3.0 | % | ||||
Flexural Strength | ASTM D790 | 145 | MPa | ||||
Flexural Modulus | ASTM D790 | 7584 | MPa | ||||
Izod Un-notch Impact | 3.20mm | ASTM D4812 | 374 | J/m | |||
Izod Notch Impact | 3.20mm | ASTM D256 | 80 | J/m | |||
Tensile Strength | ASTM D638 | 97 | MPa | ||||
Tensile Modulus | ASTM D638 | 8964 | MPa | ||||
Thermal | Condition | Standard | Value | Unit | |||
HDT | 1.80MPa | ASTM D648 | 182 | ℃ | |||
Physical property | Condition | Standard | Value | Unit | |||
Shrinkage | 3.20mm | ASTM D955 | 0.10 | % | |||
Density | ASTM D792 | 1.60 | g/cm³ | ||||
Flammability | Condition | Standard | Value | Unit | |||
Flame Rating | 3.0mm | UL94 | V-0 |
02 | Analysis of the Principle of Material Modification
・Glass fiber reinforcement: Forms a rigid framework, enhancing modulus and dimensional stability.
・PTFE filling: As a solid lubricant, it reduces the coefficient of friction and enhances wear resistance.
・Flame retardant system: Through the synergy of flame retardants and glass fibers, it ensures a balance between V-0 flame retardant grade and mechanical strength.
This composite design enables psu plastic material not only to meet the high-strength requirements, but also to achieve breakthroughs in lubrication and flame retardant performance.
03 | Application Engineering Recommendations
Injection Molding Wall Thickness: Maintaining 2–4 mm ensures a balance between strength and flowability.
Friction Component Design: Can be combined with PTFE coating or surface treatment to extend service life.
Cooling and Heat Treatment: Uniform cooling reduces stress and improves dimensional accuracy.
Appearance options: Black and natural colors balance functionality and visual appeal.
04 | Industry Applications
Electronic and electrical industries
・Insulation components, switch holders, and relay housings
・Maintain stability in high-temperature and arc-causing environments while also offering flame-retardant safety features.
Automotive and transportation
・For lubricating, wear-resistant, and heat-resistant structural components, such as pump bodies, bearing brackets, and friction plates.
・High strength and lubricity reduce maintenance frequency and improve reliability.
Medical and experimental equipment
・It is suitable for components with high safety requirements such as high-temperature resistance, chemical corrosion resistance and flame retardancy
・Such as the shells of surgical auxiliary tools and the support parts of analyzers
Industrial fluid system
・Valves, pump body components and other high-friction and chemical-resistant environment applications
・The lubrication characteristics ensure long-term stable operation
05 | Industry trends and values
New energy and electric vehicles: The demand for high-temperature resistant, flame-retardant and electrical insulating materials is increasing. PSU 905 TFE 15 is a reliable choice.
Lightweighting of electronic products: Replacing metal components, reducing weight and energy consumption, while meeting flame retardant requirements.
Environmental protection of medical equipment: psu plastic material, which can be sterilized at high temperatures multiple times, is more favored.
06 | Comparisons and Advantages
Compared to pure PSU: More balanced performance, with improved strength, lubricity, and flame retardancy.
Compared to PPSU: Although PPSU has slightly higher temperature resistance, its cost and lubricity are inferior to PSU 905 TFE 15.
Compared to PA or POM: PSU plastic material excels in high-temperature performance, flame retardancy, and chemical stability.
07 | Recommended Products with Similar Lubricity Properties
In addition to PSU 905 TFE 15, several other self-lubricating materials in the engineering plastics market are also commonly used in high-friction and wear-resistant applications:
Manufacturer | Product Model | Value Summary | Description | Specific Gravity |
Tekoma | PSU GF30 TL15 | Heat Deflection Temperature: 210 °C | Material Property: Lubricated | 1.59 g/cm³ |
Tekoma | PSU GF20 TL5 | Material Property: Lubricated | 1.42 g/cm³ | |
Tekoma | PSU TL20 | Flammability Rating: V-0Heat Deflection Temperature: 188 °C | Material Property: Lubricated | — |
LATI | 95-25GR CE/10 | Notched Impact: 2 kJ/m²Heat Deflection Temperature: 175 °C | Material Property: Lubricated • Self-lubricated | 1.49 g/cm³ |
LATI | 95-15T | Notched Impact: 7 kJ/m²Heat Deflection Temperature: 180 °C | Material Property: Self-lubricated • Lubricated | 1.35 g/cm³ |
Antep | 900 TFE 5 | Flammability Rating: V-1 | Material Property: Lubricated | 1.27 g/cm³ |
Antep | 900 TFE 10 | Flammability Rating: V-1 | Material Property: Lubricated | 1.28 g/cm³ |
Antep | 900 TFE 15 | Flammability Rating: V-1 | Material Property: Lubricated | 1.32 g/cm³ |
08 | Juyuan Supply Chain and Sourcing Strategy
Multiple specifications and stable supply: Meet the needs of both bulk and urgent orders.
Certifications and Compliance: Certified to international standards such as UL94 V-0, it meets the requirements of electronics, automotive, and medical applications.
Application-Driven Selection: Utilizes industry trends and specific application scenarios to help buyers optimize material decisions.
09 | Conclusion
Antep PSU 905 TFE 15 represents an innovative application of PSU plastic material in modern engineering plastics. It is not only a high-temperature-resistant polysulfone material, but also a composite solution that balances strength, lubricity, and flame retardancy. For buyers seeking high performance, high safety, and long life, PSU 905 TFE 15 is a material choice worthy of special consideration.
【Related Recommendations】
4TECH® 9W22110 PSU: 10% Glass Fiber Reinforced Polysulfone with Medium Flow Learn more>
What is Polysulfone (PSU)? Material Analysis and Global Supply TrendsNew Energy Industry Learn more>
TECASON™ S Polysulfone: Heat-Resistant Transparent Engineering Plastic Learn more>