สินค้า


เม็ดพลาสติก PA6 11G6-201 ของ Changchun คู่มือฉบับเต็ม
โครงสร้างผลิตภัณฑ์
What is PA6 11G6-201
As a professional supplier in the field of plastic raw materials, we understand the key impact of high-performance engineering plastics on product quality. Changchun PA6 11G6-201 is a 30% glass-fibre reinforced flame-retardant nylon material that we especially recommend for high-end applications, and its excellent comprehensive performance has been proven in many industrial fields.
01 | Key Advantages of PA6 11G6-201
Enhanced Mechanical Performance
With 30% glass fibre reinforcement, the material shows mechanical strength far beyond that of ordinary PA6. In practice, we have noticed that automotive intake manifolds made from this material maintain their structural integrity under long-term vibration conditions, thanks to its excellent fatigue resistance. At the same time, its well-balanced stiffness to toughness ratio makes it an ideal choice for precision structural components.
Reliable flame protection
PA6 11G6-201's UL94 V-0 certified flame resistance provides a solid guarantee of product safety. Our application cases in the field of electronics and electrical appliances show that housing components made of this material can effectively prevent the spread of fire, buying valuable emergency response time for critical equipment.
Stable high-temperature resistance
PA6 11G6-201 is particularly suitable for engine compartment components because of its ability to maintain stable performance at temperatures of up to 220°C. We recommend that customers use this material in applications involving cyclical temperatures. We recommend that customers take full advantage of this in applications involving cyclical temperature changes.
02 | Typical application scenarios:
Automotive manufacturing
High-temperature-resistant components around engines
Protective housings for electrical systems
Structural load-bearing components
Electrical and electronics industry
High voltage connectors
Circuit breaker housings
Motor insulation components
Industrial equipment manufacturing
Structural components for automation equipment
Wear-resistant drive components
Special tool housings
03 | Processing recommendations
Injection moulding
Recommended drying conditions: 80-90°C, 4-6 hours
Melt temperature: 240-280°C
Mould temperature: 60-80°C
Extrusion moulding
For profile and tube production
Cooling rate control is required to reduce internal stresses.
04 | PA6 11G6-201 Plastic Datasheet
แอล | เงื่อนไข | มาตรฐาน | ค่า | หน่วย | |||
ซีทีไอ | มอก.60112 | 1 | พีแอลซี | ||||
สทท | สายไฟฟ้าทุกสี 0.75มม. | UL 746B | 65 | องศาเซลเซียส | |||
สทท | สายไฟฟ้าทุกสี 3.0มม. | UL 746B | 65 | องศาเซลเซียส | |||
สทท | อิมพ์ออลคัลเลอร์ 0.75มม. | UL 746B | 65 | องศาเซลเซียส | |||
สทท | อิมพ์ออลคัลเลอร์ 3.0มม. | UL 746B | 65 | องศาเซลเซียส | |||
สทท | สตรออลคัลเลอร์ 0.75มม. | UL 746B | 65 | องศาเซลเซียส | |||
สทท | สตรออลคัลเลอร์ 3.0มม. | UL 746B | 65 | องศาเซลเซียส | |||
ระดับเปลวไฟ | ทุกสี 0.75มม. | UL94 | วี-0 | ||||
ระดับเปลวไฟ | ทุกสี 3.0มม. | UL94 | วี-0 | ||||
พฤติกรรมทางกล | เงื่อนไข | มาตรฐาน | ค่า | หน่วย | |||
การยืดตัว | หยุดพัก | ISO 527 | 3.0 | % | |||
ความแข็งแรงของแรงดัดงอ | ISO178 | 240 | MPa | ||||
โมดูลัสแรงดัดงอ | ISO178 | 8000 | MPa | ||||
ความต้านแรงดึง | หยุดพัก | ISO 527 | 155 | MPa | |||
โมดูลัสแรงดึง | ISO 527 | 9800 | MPa | ||||
แรงกระแทกแบบชาร์ปี้ โนตช์ | 23°C 1eA型 | ISO179 | 12 | กิโลจูล/ตรม | |||
ความร้อน | เงื่อนไข | มาตรฐาน | ค่า | หน่วย | |||
เอชดีที | 0.45MPa | ISO75 | 220 | องศาเซลเซียส | |||
เอชดีที | 1.8MPa | ISO75 | 210 | องศาเซลเซียส | |||
อุณหภูมิการหลอมละลาย | 10°C/นาที | ISO11357 | 222 | องศาเซลเซียส | |||
คุณสมบัติทางกายภาพ | เงื่อนไข | มาตรฐาน | ค่า | หน่วย | |||
การดูดซับความชื้น | 50RH | ISO62 | 1.7 | % | |||
การหดตัว | xFlow | ISO294 | 0.1~0.3 | % | |||
ความหนาแน่น | ISO1183 | 1.52 | กรัม/ซม.³ | ||||
คุณสมบัติทางไฟฟ้า | เงื่อนไข | มาตรฐาน | ค่า | หน่วย | |||
ความต้านทานปริมาตร | ไออีซี 60093 | 1E+15 | Ω.ซม | ||||
ความแข็งแรงของฉนวนไฟฟ้า | 2.0มม. | ไออีซี 60243 | 21 | เควี/มม | |||
ความต้านทานพื้นผิว | ไออีซี 60093 | 1E+12 | โอห์ม | ||||
ความไวไฟ | เงื่อนไข | มาตรฐาน | ค่า | หน่วย | |||
ระดับเปลวไฟ | ทุกสี 0.75มม. | UL94 | วี-0 | ||||
ระดับเปลวไฟ | ทุกสี 3.0มม. | UL94 | วี-0 |
05 | Market Advantages
Cost-effective: Compared to imported brands (e.g. BASF Ultramid® B3EG6), Changchun PA6 11G6-201 offers similar properties but at a lower cost.
Localised supply: shorter lead times, suitable for China's manufacturing needs.
Environmental compliance: RoHS and REACH compliant.
06 | Frequently Asked Questions (FAQ)
Q1: Is PA6 11G6-201 suitable for long-term outdoor use?
A: It is recommended to add UV stabilisers to improve weathering resistance, otherwise long-term exposure may cause aging.
Q2: What are the disadvantages of this material compared to PA66?
A: The heat resistance and rigidity of PA6 is slightly lower than PA66, but the cost is lower and the processing performance is better.
Q3: How can I improve the moisture absorption of the material?
A: The effects of moisture absorption can be reduced by post-drying treatments or surface coatings, and moisture-proof packaging is recommended for storage of critical parts.
07 | ติดต่อเรา
Our technical service team is always ready to provide you with:
✔ Free sample testing support
✔ Customized performance optimization plan
✔ Comparative analysis of competing product materials
✔ On-site diagnosis of processing problems
For more product details or to discuss solutions for specific application scenarios, please feel free to call our professional technical advisors at any time. Let's join hands and create greater value for your products with professional material solutions.
【ข้อแนะนำที่เกี่ยวข้อง】
PA6 YH800: ไนลอน 6 ที่เป็นมิตรกับกระบวนการพร้อมความแข็งแรงที่สมดุลสำหรับชิ้นส่วนอุตสาหกรรม เรียนรู้เพิ่มเติม>
PA6-G30: วัสดุ PA6 ที่มีความแข็งสูงสำหรับการใช้งานยานยนต์และไฟฟ้า เรียนรู้เพิ่มเติม>
PA6 B3WG6: โพลีเอไมด์ 6 เติมแก้วที่คงสภาพด้วยความร้อนสำหรับการใช้งานที่ต้องการความแม่นยำสูง เรียนรู้เพิ่มเติม>