สินค้า


BASF PSU 6010|Chemical Resistance PSU Polymer For Sanitary
โครงสร้างผลิตภัณฑ์
What is PSU Polymer
In the field of precision manufacturing, purchasers not only focus on the performance indicators of materials, but also care whether they can meet the usage requirements in complex environments for a long time. psu polymer (polysulfone) has become a commonly used material for medical devices, electronic components and bathroom accessories due to its molecular stability and reliable engineering properties. Basf PSU 6010, as a representative among them, not only has the advantages of heat resistance and chemical resistance, but also can provide definite guarantees for purchasers in terms of dimensional stability and electrical insulation.
01 | Material Advantages
Long-term tolerance: It can maintain a stable structure even in acidic, alkaline, cleaning agents and hot water environments.
Mechanical reliability: Tensile strength 75 MPa, modulus 2550 MPa, suitable for load-bearing structural components.
Environmental adaptability: Low shrinkage rate (0.72-0.77%), low water absorption rate (0.3%), ensuring that the parts maintain precision under humidity or temperature differences.
Safety insulation: Volume resistance 1E15 Ω·cm, insulation strength 37 kV/mm, suitable for electrical applications.
เสถียรภาพทางความร้อน: The heat distortion temperature is 177°C, and it can maintain its shape unchanged in high-temperature applications.
02 | Basf Ultrason®S 6010 psu polymer
พฤติกรรมทางกล | เงื่อนไข | มาตรฐาน | ค่า | หน่วย | |||
การยืดตัว | ผลผลิต 23°C | ISO 527 | 5.7 | % | |||
อิซอด นอทช์ อิมแพ็ค | 23°ซ | ISO180 | 6.0 | กิโลจูล/ตรม | |||
อิซอด นอทช์ อิมแพ็ค | -30 องศาเซลเซียส | ISO180 | 6.5 | กิโลจูล/ตรม | |||
ความต้านแรงดึง | ผลผลิต 23°C | ISO 527 | 75.0 | MPa | |||
โมดูลัสแรงดึง | 23°ซ | ISO 527 | 2550 | MPa | |||
ชาร์ปี้ อิมแพ็คแบบไร้รอยบาก | 23°ซ | ISO179 | หมายเหตุ | ||||
ชาร์ปี้ อิมแพ็คแบบไร้รอยบาก | -30 องศาเซลเซียส | ISO179 | หมายเหตุ | ||||
แรงกระแทกแบบชาร์ปี้ โนตช์ | 23°ซ | ISO179 | 6.0 | กิโลจูล/ตรม | |||
แรงกระแทกแบบชาร์ปี้ โนตช์ | -30 องศาเซลเซียส | ISO179 | 6.5 | กิโลจูล/ตรม | |||
ความร้อน | เงื่อนไข | มาตรฐาน | ค่า | หน่วย | |||
เอชดีที | ยังไม่อบอ่อน 1.8MPa | ISO75 | 177 | องศาเซลเซียส | |||
คลี | ไหล | 5.3E-5 | ซม./ซม./°C | ||||
คุณสมบัติทางกายภาพ | เงื่อนไข | มาตรฐาน | ค่า | หน่วย | |||
การดูดซึมน้ำ | ความอิ่มตัว 23°C | ISO62 | 0.80 | % | |||
การดูดซึมน้ำ | 23°C 50RH Balance | ISO62 | 0.30 | % | |||
การหดตัว | ไหล | ISO294 | 0.72 | % | |||
การหดตัว | xFlow | ISO294 | 0.77 | % | |||
ความหนาแน่น | ISO1183 | 1.23 | กรัม/ซม.³ | ||||
ดัชนีการหลอมละลาย | 360°C 10kg | ISO 1133 | 30 | cm³/10นาที | |||
คุณสมบัติทางไฟฟ้า | เงื่อนไข | มาตรฐาน | ค่า | หน่วย | |||
ซีทีไอ | มอก.60112 | 125 | วี | ||||
ค่าคงที่ไดอิเล็กตริก | 1เมกะเฮิรตซ์ | มอก.60250 | 3.40 | ||||
ค่าคงที่ไดอิเล็กตริก | 100เฮิรตซ์ | มอก.60250 | 3.50 | ||||
ความต้านทานปริมาตร | ไออีซี 60093 | 1E15 | Ω.ซม | ||||
ความแข็งแรงของฉนวนไฟฟ้า | ไออีซี 60243 | 37 | เควี/มม | ||||
ปัจจัยการกระจาย | 1เมกะเฮิรตซ์ | มอก.60250 | 0.0071 | ||||
ปัจจัยการกระจาย | 100เฮิรตซ์ | มอก.60250 | 0.0011 | ||||
ความต้านทานพื้นผิว | ไออีซี 60093 | 1E15 | โอห์ม | ||||
ความแข็ง | เงื่อนไข | มาตรฐาน | ค่า | หน่วย | |||
ความแข็งของรอยบุ๋มของลูกบอล | ISO2039 | 135 | MPa |
03 | Processing and process compatibility
PSU 6010 is supplied in granular form and is suitable for injection molding and extrusion.
・Injection molded parts: Medical shells, bathroom components, with complex shapes but requiring long-term reliability.
・Extruded products: film materials, tubes and coatings, with higher requirements for dimensions and surface stability.
Its melt index is 30 cm³/10min (360°C/10kg), achieving a balance between processing fluidity and product accuracy.
04 | Application direction
Combined with its performance, the application value of psu polymer is mainly reflected in:
-Water treatment membranes and diaphragms: Chemical resistance ensures filtration efficiency and service life.
-High-end bathroom fixtures: Reliable even after long-term contact with hot water and cleaning agents.
-Medical and electronic protective layers: Enhance equipment safety and durability.
-Electrical insulation components: Ensure safe operation in areas such as connectors and insulation brackets.
05 | Industry trends
Rather than merely emphasizing "high performance", what deserves more attention from purchasers is:
-Cost-effectiveness: PSU often outperforms cheaper alternative materials in terms of durability and life cycle.
-Alternative solution: In response to the demand for lightweighting of some metal and glass products, PSU offers more flexible design and processing space.
-Compliance: Under the increasingly strict material standards in the medical and electronic industries, psu polymer has become a stable choice.
06 | Frequently Asked Questions (FAQ)
Q1: What are the differences between PSU 6010 and common PC or PPO?
A1: PSU is more heat-resistant and chemical-resistant, and also has better dimensional stability, making it suitable for long-term use scenarios.
Q2: What details should be noted during processing?
A2: The temperature needs to be controlled at around 360° C. In the mold design, the shrinkage rate of the material should be taken into consideration.
Q3: Can it be in long-term contact with hot water or cleaning agents?
A3: Yes, that's exactly why PSU 6010 is widely adopted in bathrooms and medical fields.
Q4: How to ensure a stable supply?
A4: Juyuan provides global supply chain guarantee to ensure the continuous delivery of psu polymer materials.
Q5: What if I'm not sure if it's suitable for my project?
A5: You can contact the Juyuan technical team to obtain professional selection advice and alternative solutions.
07 | Similar recommendations
In addition to BASF PSU 6010, purchasers can also pay attention to:
ผู้ผลิต | รุ่นสินค้า | Value Summary | คำอธิบาย | ความหนาแน่น | Melt Flow Index | ความต้านแรงดึง | การยืดตัว | การหดตัว | อุณหภูมิการหลอมละลาย | โมดูลัสแรงดึง | Heat Distortion Temperature | Notched Izod Impact | Coefficient of Linear Expansion |
BASF | 6010 NAT | Viscosity: High ViscosityNotched Impact: 6 kJ/m² | Material Properties: Unreinforced • Toughness • Chemical Resistance | 1.23 g/cm³ | 30 cm³/10min | 75 MPa | 5.70% | 0.72% | 330~390 °C | 2550 MPa | 177 °C | 6 kJ/m² | 5.3E-5 cm/cm/°C |
08 | Why choose Juyuan
-Global procurement and delivery capabilities reduce supply chain risks
-Provide multiple categories of psu polymer options to cover the requirements of different working conditions
-One-on-one material selection support reduces the trial-and-error costs for the purchasing party
【ข้อแนะนำที่เกี่ยวข้อง】
BASF Ultrason® S 3010 | Heat-Resistant Polysulfone for Labware เรียนรู้เพิ่มเติม>
BASF PSU 2010 | High Flowability PSU Polysulfone for Household เรียนรู้เพิ่มเติม>
Plastic Raw Materials Supply Guide | For Household Appliance Manufacturing เรียนรู้เพิ่มเติม>