ДОМПРОДУКТЫПКPC A1150 | Flame-Retardant PC Material for General Applications

ПРОДУКТЫ

  • PC A1150 | Flame-Retardant PC Material for General Applications
  • PC A1150 | Flame-Retardant PC Material for General Applications
  • PC A1150 | Flame-Retardant PC Material for General Applications
  • PC A1150 | Flame-Retardant PC Material for General Applications
  • PC A1150 | Flame-Retardant PC Material for General Applications
  • PC A1150 | Flame-Retardant PC Material for General Applications

PC A1150 | Flame-Retardant PC Material for General Applications

Wanhua PC A1150 is a transparent PC material designed for injection and extrusion, featuring 89% light transmission, V-2 flame rating, and strong impact resistance. Ideal for structural parts in consumer goods and electronics.

свяжитесь с нами бесплатно

  • Структура продукта

What is PC Material

 

Against the backdrop of higher demands for optical transparency, structural strength and flame retardant safety in multiple fields, how to select a pc material with balanced performance has become the focus of attention for designers and manufacturers. Wanhua PC A1150, with its excellent molding adaptability, outstanding light transmittance and good impact resistance, is gradually becoming a popular choice in composite molding and general plastic applications.

PC A1150,

 

01 | Overview of the Performance Highlights of PC A1150 Material


PC A1150 is a granular polycarbonate raw material with the following core characteristics:

  ・Medium viscosity, suitable for injection molding of complex structures and continuous profile extrusion;

  ・It has excellent transparency, with a transmittance of 89% at a thickness of 3mm and a haze as low as 0.8%.

  ・It has strong thermal stability, with a heat distortion temperature of up to 128°C and a Vicat softening point as high as 148°C.

  ・Good flame retardant performance, reaching UL94 V-2 grade at a thickness of 1.5mm;

  ・The mechanical properties are balanced, with an elongation at break as high as 120% and an impact resistance of up to 75 kJ/m².

  ・It has excellent electrical performance, with a volume resistance as high as 10¹⁷ Ω·cm, making it suitable for electrical components.

As a material that emphasizes performance and versatility, PC A1150 is positioned at the balance point between composite molding, optical applications and general structural components, and it is a relatively representative mid-range solution among PC materials.

 

02 | Recommended Application Fields

 

Industry SectorRecommended Uses
Consumer ElectronicsLight covers, display windows, housing components
Industrial EquipmentProtective covers, viewing windows, equipment panels
TransportationInterior structural parts, lighting housings
Architectural LightingLight diffusers, extruded profiles
Home AppliancesHousings, transparent components, safety shields

 

03 | PC Material Data Sheet

 

Оптические характеристикиСостояниеСтандартныйЦенитьЕдиница
Показатель преломленияАСТМ Д5421.586
Пропускание3000μmАСТМ Д100389%
Механическое поведениеСостояниеСтандартныйЦенитьЕдиница
УдлинениеПроизводительность 50мм/минАСТМ Д6386%
УдлинениеРазрыв 50мм/минАСТМ Д638120%
Прочность на изгиб2,0 мм/минАСТМ Д79097МПа
Модуль упругости при изгибе2,0 мм/минАСТМ Д7902300МПа
Удар по Изоду23°САСТМ Д25675кДж/м²
Предел прочностиРазрыв 50мм/минАСТМ Д63870МПа
Предел прочностиПроизводительность 50мм/минАСТМ Д63865МПа
Модуль упругости1,0 мм/минАСТМ Д6382300МПа
ТермальныйСостояниеСтандартныйЦенитьЕдиница
HDT1.8MPa 3.2mmАСТМ Д648128°С
Температура размягчения по Вика120°C/ч 50НАСТМ Д1525148°С
Физическая собственностьСостояниеСтандартныйЦенитьЕдиница
Поглощение воды23°C 24 часаАСТМ Д5700.2%
УсадкаАСТМ Д9550.5~0.7%
ПлотностьАСТМ Д7921.2г/см³
Индекс плавления300°C 1.2kgАСТМ Д123816г/10мин
Индекс плавления300°C 1.2kgАСТМ Д123815см³/10мин
Электрические свойстваСостояниеСтандартныйЦенитьЕдиница
КТИsolution AМЭК 60112250В
Диэлектрическая постоянная1МГцМЭК 602503.0
Диэлектрическая постоянная100 ГцМЭК 602503.1
Объемное сопротивлениеМЭК 600931E+17Ом.см
Диэлектрическая прочность1.0ммМЭК 6024334КВ/мм
Коэффициент рассеивания1МГцМЭК 602500.009
Коэффициент рассеивания100 ГцМЭК 602500.0005
Поверхностное сопротивлениеМЭК 600931E17Ом
ВоспламеняемостьСостояниеСтандартныйЦенитьЕдиница
Рейтинг пламени1,5 ммUL94В-2
Рейтинг пламени3ммUL94полупансион

 

04 | Compatibility of molding process

 

PC A1150 is compatible with both injection molding and extrusion molding. With a melt index of 16g /10min, it can not only meet the injection molding requirements of multi-chamber and thin-walled products, but also has sufficient fluidity to support the continuous production of extruded products such as lampshade plates and profiles.

  ・Injection molding recommended temperature range: 280–320°C;

  ・Mold temperature is recommended to be controlled at: 80–100°C;

  ・Can be used for two-color molding or co-injection of structural parts with other engineering plastics.

 

05 | Industry Trend: The application of transparent structural components is growing, driving material upgrades

 

With the development of industries such as smart terminals, in-vehicle systems, and lighting components, higher structural and flame retardant requirements have been put forward for transparent parts. Traditional PMMA is gradually being replaced by PC materials due to its lack of strength and flame retardancy. However, PC A1150, with its stronger heat resistance and mechanical toughness, is becoming an ideal alternative to non-flame-retardant PC material and some low-performance alloy plastics.

 

06 | Similar Recommendations: More popular PC material recommendations from Juyuan

 

ПроизводительМодель продуктаПлотностьИндекс плавленияSummaryDescription
Wanhua1105FL1.2 g/cm³9 g/10minViscosity: MediumFlame Rating: HB • V-2Melt Index: 9 g/10minNotched Impact: 80 kJ/m²Material Property: Easy DemoldingApplication: Optical Applications
WanhuaFL51051.2 g/cm³10 g/10minViscosity: MediumFlame Rating: HB • V-2Melt Index: 10 g/10minNotched Impact: 81.63 kJ/m²Material Property: Easy DemoldingApplication: General Purpose


Juyuan offers a variety of PC materials, supporting direct supply from the origin, specification comparison and selection, as well as sample provision services.
Welcome to contact us for detailed information.

 

07 | Frequently Asked Questions (FAQ)

 

Q1: What are the differences between PC A1150 and other transparent PC materials?
A1: PC A1150, while balancing light transmittance and mechanical strength, has better molding adaptability and is suitable for moderately complex general applications.

Q2: Does it have a flame retardant grade?
A2: At a thickness of 1.5mm, it is of UL94 V-2 grade and suitable for ordinary electrical enclosures.

Q3: Can PC A1150 be used outdoors?
A3: It does not have UV resistance and is not recommended for long-term outdoor use.

Q4: Is sample provision supported?
A4: Supported. Juyuan can provide samples and technical data for comparison and selection.

Q5: Can thick-walled transparent products be made?
A5: Sure. It is recommended to combine it with mold temperature control to avoid fogging or cracking caused by internal stress.

 

08 | Why Choose Juyuan?

 

As a supplier with 24 years of international experience in plastic raw material trade, Juyuan focuses on the trade of virgin pellets and offers:

🔍 Original factory comparison and alternative recommendation support to help you make quick decisions;

📦 direct supply of virgin granules, stable supply and flexible delivery cycle;

📄 complete compliance documents: REACH, RoHS, COA, UL documents are all complete;

🌐 Cross-border logistics system: covering multiple countries and regions in Asia, Europe, the Middle East and South America.

 

Summary

 

PC A1150 is a universal pc material suitable for multiple scenarios, with balanced performance and taking into account the requirements of optics, structure and flame retardancy. It features stable processing and reliable performance, making it one of the ideal basic materials for various electronic, electrical, lighting and industrial products.

📨 If you have sample requirements or technical inquiries, please feel free to contact Juyuan. We will match the most suitable polycarbonate solution for you.

PC materials

PC materials

 

 

【Связанные рекомендации】

 

PC 1803 Heat-Resistant Polycarbonate Granule for Lighting Application Узнать больше>


Which plastics are safe? A professional guide for manufacturers and purchasers Узнать больше>


PC 2405 MAS057: Black Transparent Polycarbonate Granules for Efficient Demolding Узнать больше>


 

Бесплатно свяжитесь с нами