ДОМПРОДУКТЫБПBASF Ultrason® S 3010 | Heat-Resistant Polysulfone for Labware

ПРОДУКТЫ

  • BASF Ultrason® S 3010 | Heat-Resistant Polysulfone for Labware
  • BASF Ultrason® S 3010 | Heat-Resistant Polysulfone for Labware
  • BASF Ultrason® S 3010 | Heat-Resistant Polysulfone for Labware
  • BASF Ultrason® S 3010 | Heat-Resistant Polysulfone for Labware
  • BASF Ultrason® S 3010 | Heat-Resistant Polysulfone for Labware
  • BASF Ultrason® S 3010 | Heat-Resistant Polysulfone for Labware

BASF Ultrason® S 3010 | Heat-Resistant Polysulfone for Labware

BASF Ultrason® S 3010 (PSU 3010) is a high-viscosity polysulfone granule with chemical resistance, stress-crack resistance, and toughness. It suits labware, household goods, and electrical parts, offering stable thermal and electrical insulation performance.

свяжитесь с нами бесплатно

  • Структура продукта

What is Ultrason® S 3010

 

BASF Ultrason® S 3010 (PSU 3010) is a high-viscosity Polysulfone particle, specially designed for injection molding processing. It combines chemical resistance, stress crack resistance and toughness, and is suitable for application scenarios that require long-term reliability, such as laboratory equipment and household items. For manufacturers pursuing stable performance and processing efficiency, ultrason s 3010 offers a balanced and sustainable solution.

Ultrason® S 3010

 

01 | Material highlights and procurement value

 

From the perspective of purchasers, the advantages of Ultrason® S 3010 lie not only in its physical parameters but also in its ability to address the pain points in practical applications:

Chemical resistance and stress crack resistance

  ・In laboratory equipment and chemical environments, materials are prone to erosion by cleaning agents, acids, alkalis or organic solvents. The chemical resistance and stress crack resistance of PSU 3010 ensure that the product can maintain structural integrity during long-term use and will not fail prematurely due to stress concentration.

  ・Solve the problem: Reduce product scrapping and after-sales costs caused by cracking.

Хорошая механическая прочность и ударная вязкость

  ・The tensile strength is 75 MPa, and the impact toughness can still maintain 6.0 kJ/m² at a low temperature (-30°C), demonstrating the material's stability under extreme conditions.

  ・Problem-solving: Ensure that the products remain safe and reliable in the event of drops, impacts or cold environments, and reduce customer complaints.

Отличная термическая стабильность

  ・The heat distortion temperature (1.8MPa) reaches 177°C, and the long-term service temperature can be maintained at 155°C.

  ・Solution: Experimental equipment and household appliances suitable for high-temperature environments, avoiding precision failure caused by thermal deformation.

Electrical insulation and flame retardancy

  ・The volume resistance is as high as 1E15 Ω·cm, the insulation strength is 37 kV/mm, and the flame retardant grade is UL94 HB.

  ・Solution: Provide stable insulation protection for electrical components and laboratory instruments to enhance usage safety.

Адаптивность обработки

  ・The melt index (360°C, 10kg) is 40 cm³/10min, with excellent fluidity and suitable for precision injection molding.

  ・Solve the problem: Enhance production efficiency and reduce the defective rate during the processing.

 

02 | BASF Ultrason® S 3010 Data Sheet

 

Электрические свойстваСостояниеСтандартныйЦенитьЕдиница
КТИМЭК 60112125В
ДиэлектрикСилаМЭК 6024337КВ/мм
ДиэлектрикПостоянная 100 ГцМЭК 602503.1
ДиэлектрикПостоянныйМЭК 602503.1
РассеиваниеФактор 100ГцМЭК 602508
РассеиваниеФактор 1МГцМЭК 6025064
ПоверхностьУдельное сопротивлениеМЭК 600931E+15Ом
ОбъемУдельное сопротивлениеМЭК 600931E+13Ом.см
ВоспламеняемостьСостояниеСтандартныйЦенитьЕдиница
ПламяРейтинг Все цвета 0,75 ммUL94полупансион
ПламяРейтинг Все цвета 1,5 ммUL94полупансион
ПламяРейтинг Все цвета 3,0 ммUL94полупансион
ТвердостьСостояниеСтандартныйЦенитьЕдиница
МячIndentation HardnessИСО 2039135МПа
Механическое поведениеСостояниеСтандартныйЦенитьЕдиница
ШарпиНадрез Удар -30°CИСО 1796кДж/м²
ШарпиНадрез Удар 23°CИСО 1795.5кДж/м²
ШарпиУдар без надреза -30°CИСО 179Примечание:кДж/м²
ШарпиУдар без надреза 23°CИСО 179Примечание:кДж/м²
УдлинениеВыход 23°CИСО 5276%
ИзодУдарная вязкость -30°CИСО 1806кДж/м²
ИзодНадрез Удар 23°CИСО 1805.5кДж/м²
РастяжимыйМодуль 23°СИСО 5272550МПа
РастяжимыйПредел текучести при 23°CИСО 52775МПа
Физическая собственностьСостояниеСтандартныйЦенитьЕдиница
ПлотностьИСО 11831.23г/см³
ТаятьИндекс 360°C 10кгИСО 113340см³/10мин
УсадкаПотокИСО 2940.7%
УсадкаxFlowИСО 2940.74%
ВодаПоглощение 50RHИСО 620.3%
ВодаAbsorption   SaturationИСО 620.8%
ТермальныйСостояниеСтандартныйЦенитьЕдиница
КЛЕПотокВНУТРЕННИЙ МЕТОД5.3E-5см/см/°С
HDT1,8 МПаИСО 75177°С
ULСостояниеСтандартныйЦенитьЕдиница
ДугаСопротивлениеASTM D4955ПЛК
СравнительныйИндекс отслеживанияМЭК 601123ПЛК
ДиэлектрикСилаАСТМ Д14932КВ/мм
РазмерныйСтабильностьУЛ7460.0%
ХАЙВСЕ 0,75 ммУЛ 746А4ПЛК
ХАЙВСЕ 1,5 ммУЛ 746А4ПЛК
ХАЙВСЕ 3.0ммУЛ 746А0ПЛК
ХВТРУЛ 746А3ПЛК
HWIВСЕ 0,75 ммУЛ 746А4ПЛК
HWIВСЕ 1,5 ммУЛ 746А3ПЛК
HWIВСЕ 3.0ммУЛ 746А2ПЛК
РТИЭлектро ВСЕ 0,75 ммУЛ 746Б155°С
РТИЭлектро ВСЕ 1,5 ммУЛ 746Б155°С
РТИЭлектро ВСЕ 3,0 ммУЛ 746Б155°С
РТИИмп ВСЕ 0,75 ммУЛ 746Б130°С
РТИИмп ВСЕ 1,5ммУЛ 746Б130°С
РТИИмп ВСЕ 3,0 ммУЛ 746Б130°С
РТИStr ВСЕ 1,5ммУЛ 746Б155°С
РТИStr ВСЕ 3,0 ммУЛ 746Б155°С
ULОгнестойкость ВСЕ 0,75 ммUL94полупансион
ULРейтинг пламени ВСЕ 1,5 ммUL94полупансион
ULРейтинг пламени ВСЕ 3,0 ммUL94полупансион
ОбъемУдельное сопротивлениеАСТМ Д2571E+12Ом.см

 

03 | Technical process and processing compatibility

 

Ultrason® S 3010, as a high-viscosity PSU, is specially optimized for injection molding processes and features the following characteristics:

  ・Forming temperature range: It is recommended to carry out melting processing at 340-380° C. The mold temperature is suggested to be maintained at 160-180°C to ensure dimensional stability.

  ・Screw design suggestion: High-temperature resistant screw materials should be adopted to prevent material degradation at high temperatures.

  ・Mold compatibility: Suitable for forming thick-walled parts and transparent utensils, with a processing shrinkage rate of only 0.7-0.74%, which helps maintain part accuracy.

  ・Secondary Processability: Machining, bonding, and thermal welding are possible, facilitating post-processing in various application scenarios.

These process parameters enable buyers to better control yield and cost during mass production.

 

04 | Market Trends and Industry Dynamics

 

According to BASF's latest market news, the Ultrason® product line has seen significant growth in recent years in medical and laboratory equipment, heat-resistant consumer goods, and power tool components. In particular, in 2024, BASF announced the expansion of PSU production capacity in Germany and Asia to meet the rapidly growing demand for high-temperature-resistant transparent plastics in the downstream medical and electrical appliance industries.

  ・Medical and Laboratory: It can replace some glassware, reducing the risk of breakage.

  ・Home Appliances and Kitchenware: It is more heat-resistant and washable, meeting consumer trends for durability and safety.

  ・Electrical and Electronics: It meets the dual requirements of electrical insulation and high-temperature resistance.

For buyers, this means greater material supply stability and reduced future procurement risks.

 

05 | Customer Feedback

 

  ・A laboratory equipment manufacturer: Choosing Ultrason® S 3010 instead of traditional glass has reduced product scrap rates by 40% and significantly improved transportation safety.

  ・A customer in the home appliance industry stated: Using PSU 3010 for kitchen appliance housings solves the problem of plastic brittle cracking caused by long-term cleaning, extending the product lifecycle.

  ・An electronic device customer stated: Using it on electrical insulation components effectively reduces the risk of failure due to high temperatures or stress cracking.

These practical application feedbacks further validate the value of PSU 3010 in various industries.

 

06 | FAQ - Frequently Asked Questions for Buyers

 

Q1: What is the difference between Ultrason® S 3010 and S 2010?
A1: S 3010 is a high-viscosity grade, better suited for injection molding thick-walled and high-strength components; S 2010 has a lower viscosity and better flowability, making it suitable for complex, thin-walled products.

Q2: Is this material suitable for use with metal parts?
A2: Yes. PSU 3010's dimensional stability and heat resistance enable it to work well with metal components, and it is often used in medical devices and electrical appliances.

Q3: How does Juyuan ensure timely delivery of procurement? A3: We have a stable supply channel with BASF and have logistics partners in multiple regions, supporting both bulk purchases and flexible small-batch delivery.

Q4: Do you provide technical selection and cost optimization advice?
A4: Juyuan provides material performance comparisons, alternative material recommendations, and application case studies to help customers reduce costs while maintaining stable product performance.

plastic purchasing

 

07 | Similar Recommendations

 

In addition to Ultrason® S 3010, we also offer the following related materials:

ПроизводительProduct GradeПлотностьMelt Flow IndexПредел прочностиУдлинениеУсадкаТемпература плавленияМодуль упругостиТемпература теплового прогибаNotched Izod ImpactLinear Expansion Coefficient
BASF3010 NAT1.23 g/cm³40 cm³/10min75 MPa6%0.70%330~390 °C2550 MPa177 °C5,5 кДж/м²5.3E-5 cm/cm/°C
BASF3010 MR1.23 g/cm³45 cm³/10min75 MPa5.80%0.70%2600 MPa177 °C5,5 кДж/м²5.3E-5 cm/cm/°C
BASF3010 MR UN1.23 g/cm³45 cm³/10min75 MPa5.80%0.70%330~390 °C2600 MPa177 °C5,5 кДж/м²5.3E-5 cm/cm/°C

 

08 | Why choose Juyuan as your supplier?

 

In the global plastic raw material trade, selecting a reliable supply partner is as important as choosing the right material. Juyuan offers the following advantages:

  ・24 years of experience in international plastic raw material trade, familiarity with cross-border procurement processes, and the ability to quickly connect with buyers' needs.

  ・Flexible Supply Chain: Stable channels ensure timely delivery of BASF Ultrason® S 3010 and other engineering plastics.

  ・Professional Technical Support: Beyond providing materials, we also assist customers with application selection and cost optimization.

  ・Global Customer Base: We serve a wide range of industries, including electronics, electrical, medical, and consumer goods, with extensive experience.

plastic raw material trade

 

 

【Связанные рекомендации】

 

A Complete Guide to China’s Major Plastic Raw Material Procurement Hubs & Markets Узнать больше>


BASF PSU 2010 | High Flowability PSU Polysulfone for Household Узнать больше>


Americhem PSU-GF30HF High-flow PSU Resin for Injection Molding Узнать больше>


 

Бесплатно свяжитесь с нами