What is LDPE 2100TN00?

Against the backdrop of evolving flexible packaging and agricultural films, LDPE plastic pellets remain an important base material. Among them, LDPE 2100TN00 launched by SABIC, with its high transparency, high purity and excellent processability, is widely used in the field of greenhouse film, heat shrinkable film, heavy duty bags, etc., which is ideal for manufacturers who place equal emphasis on performance and environmental protection requirements.

01 | Main features

Excellent transparency

Haze of only 12%, the material itself is clear and clean, suitable for greenhouse covering film and visible packaging film.

High flexibility and elongation

has an elongation of 200% in the flow direction and 500% in the vertical direction, ensuring that the film will not break during rolling, heat sealing or stretching.

Balanced Tensile Strength

has a tensile strength of 28 MPa in the flow direction and 23 MPa in the vertical direction, which balances the flexibility of the film with its compressive properties, making it suitable for heavy bags and other areas where tensile strength is required.

Suitable for a wide range of blow moulding equipment

With a melt index of 0.33 g/10min and stable flow, it can be adapted to medium and high speed blown film production lines to improve production consistency.

Low Specific Gravity Material

The specific gravity is 0.921 g/cm³, which belongs to the typical LDPE category, which helps to reduce the weight per unit area without increasing the thickness of the film, thus reducing the cost of packaging.

02 | Typical application scenarios

Agricultural greenhouse film: balancing light transmission and flexibility, suitable for sunlight control type film.

Heavy-duty packaging bags: suitable for industrial and commercial logistics packaging, tear-resistant and not easy to break.

Packaging Film/Heat Shrink Film: suitable for food, daily chemicals, electronic products outer packaging, used to enhance the performance of product display and transport protection.

Industrial packaging film: good ductility, puncture resistance, suitable for shaped products outer wrapping film layer.

03 | LDPE 2100TN00 Technical parameters

04 | Why choose LDPE 2100TN00 instead of other LDPE materials?

LDPE 2100TN00 exhibits higher purity control, optical performance and flexibility ratios than common blown film grade LDPE materials on the market, and is particularly valuable in the following scenarios:

   ✔ Sensitive industries (e.g., medical, electronics packaging) where additive migration needs to be avoided

   ✔ Household or high-end consumer packages where a more translucent film is desired for greater presentation

   ✔ High-speed processing lines with very high requirements for film thickness consistency and melt stability High-speed processing lines with high demands on film thickness consistency and melt stability

05 | Processing recommendations and considerations

In blown and cast film processes, it is recommended to control a narrow temperature zone to maintain stable flow characteristics and to pay attention to the cooling rhythm in order to maximise the transparency of the film.

For multilayer film structures, LDPE 2100TN00 can be used as an intermediate or outer layer to improve overall mechanical strength and enhance appearance. If functional additives are required, they can be introduced via masterbatch or coextrusion to avoid disrupting the base purity design.

06 | Get samples and collaborate

If you're looking for LDPE plastic granules for high-end films, LDPE 2100TN00 deserves to be at the centre of your list. We can provide you with:

   ✔ Product TDS and Processing Parameters

   ✔ Sample Granules and Technical Support

   ✔ Application Examples and Selection Guidance

Feel free to contact us via the contact form on the right hand side of the page for further details and partnership proposals.

【Gerelateerde aanbevelingen】