{"id":4545,"date":"2025-10-15T08:55:16","date_gmt":"2025-10-15T08:55:16","guid":{"rendered":"https:\/\/juyuans.com\/?p=4545"},"modified":"2025-10-15T08:55:57","modified_gmt":"2025-10-15T08:55:57","slug":"vestakeep-2000g-flame-retardant-medium-viscosity-peek","status":"publish","type":"post","link":"https:\/\/juyuans.com\/es\/vestakeep-2000g-flame-retardant-medium-viscosity-peek\/","title":{"rendered":"VESTAKEEP\u00ae 2000G | Flame-Retardant Medium-Viscosity PEEK"},"content":{"rendered":"

Why Choose VESTAKEEP\u00ae 2000G<\/span><\/h1>\n

 <\/p>\n

Among engineering plastics, PEEK is renowned for its heat resistance and chemical stability, but the processability varies significantly among different grades.<\/span><\/p>\n

VESTAKEEP\u00ae 2000G precisely controls the molecular weight distribution, enabling the material to maintain mechanical toughness and flame retardancy while also having ideal flow performance and demolding performance.<\/span><\/p>\n

For manufacturers who pursue dimensional accuracy, cleanliness and flame retardant safety, it is a highly balanced material choice.<\/span><\/p>\n

\"VESTAKEEP\u00ae<\/p>\n

 <\/p>\n

01 | Core Characteristics of Materials<\/span><\/h2>\n

 <\/p>\n

Sistema no reforzado:<\/strong> Maintains the cleanliness of pure resin, with no glass fiber precipitation or mold wear issues;<\/span><\/p>\n

Medium viscosity formula:<\/strong> Balancing fluidity and mechanical strength, suitable for injection molding of medium and thin-walled parts;<\/span><\/p>\n

Flame retardant safety:<\/strong> UL94 V-0 is achieved at a thickness of 0.8-1.6mm.<\/span><\/p>\n

Clean and free of precipitates:<\/strong> Meets the requirements of semiconductor and medical contact components;<\/span><\/p>\n

Stable shrinkage control:<\/strong> Approximately 0.7% flow direction, with high dimensional repeatability accuracy.<\/span><\/p>\n

 <\/p>\n

02 | Processing Technology Performance<\/span><\/h2>\n

 <\/p>\n

Wide Processing Temperature Window:<\/strong> Melting temperature is approximately 340\u00b0C, and the resin remains stable at 370\u00b0C.<\/span><\/p>\n

Smooth demolding:<\/strong> The non-reinforced system avoids the problem of mold adhesion caused by fiber breakage.<\/span><\/p>\n

Flow balance:<\/strong> Suitable for multi-cavity molds and fine flow channel designs;<\/span><\/p>\n

Mold temperature control suggestion:<\/strong> A mold temperature range of 170-200\u00b0C can achieve a denser crystalline structure.<\/span><\/p>\n

Reprocessing friendly:<\/strong> The proportion of recycled material mixing can be controlled within 20% without significantly affecting performance.<\/span><\/p>\n

 <\/p>\n

03 | Applicable Fields and Formed Value<\/span><\/h2>\n

 <\/p>\n

Semiconductor components:<\/strong> Heat-resistant and non-precipitating, suitable for high-cleanliness parts such as vacuum chambers and wafer fixtures;<\/span><\/p>\n

Medical device structural components:<\/strong> Compatible with multiple sterilization methods (EO, steam, gamma rays);<\/span><\/p>\n

Precision motion mechanism:<\/strong> Friction-stable, low-noise operation, suitable for gears, sliders, and bearings;<\/span><\/p>\n

General mechanical parts:<\/strong> Maintain dimensions and strength for a long time in harsh environments.<\/span><\/p>\n

 <\/p>\n

04 | VESTAKEEP\u00ae 2000G Data Sheet<\/span><\/h2>\n

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Comportamiento mec\u00e1nico<\/span><\/strong><\/td>\nCondici\u00f3n<\/span><\/strong><\/td>\nEst\u00e1ndar<\/span><\/strong><\/td>\nValor<\/span><\/strong><\/td>\nUnidad<\/span><\/strong><\/td>\n<\/tr>\n
Alargamiento<\/span><\/td>\nRendimiento 50 mm\/min<\/span><\/td>\nISO 527<\/span><\/td>\n5<\/span><\/td>\n%<\/span><\/td>\n<\/tr>\n
Alargamiento<\/span><\/td>\nRotura 50 mm\/min<\/span><\/td>\nISO 527<\/span><\/td>\n30<\/span><\/td>\n%<\/span><\/td>\n<\/tr>\n
Resistencia a la tracci\u00f3n<\/span><\/td>\nRendimiento 50 mm\/min<\/span><\/td>\nISO 527<\/span><\/td>\n100<\/span><\/td>\nMPa<\/span><\/td>\n<\/tr>\n
M\u00f3dulo de tracci\u00f3n<\/span><\/td>\n<\/td>\nISO 527<\/span><\/td>\n3700<\/span><\/td>\nMPa<\/span><\/td>\n<\/tr>\n
Coeficiente de fricci\u00f3n<\/span><\/td>\n0.1MPa 23\u00b0C<\/span><\/td>\nM\u00c9TODO INTERNO<\/span><\/td>\n0.4<\/span><\/td>\n<\/td>\n<\/tr>\n
Coeficiente de fricci\u00f3n<\/span><\/td>\n2MPa 23\u00b0C<\/span><\/td>\nM\u00c9TODO INTERNO<\/span><\/td>\n0.35<\/span><\/td>\n<\/td>\n<\/tr>\n
Specific Wear Rate<\/span><\/td>\n0.1MPa 23\u00b0C<\/span><\/td>\nM\u00c9TODO INTERNO<\/span><\/td>\n0.000091<\/span><\/td>\nmm\u00b3\/N.m<\/span><\/td>\n<\/tr>\n
Specific Wear Rate<\/span><\/td>\n2MPa 23\u00b0C<\/span><\/td>\nM\u00c9TODO INTERNO<\/span><\/td>\n0.0001668<\/span><\/td>\nmm\u00b3\/N.m<\/span><\/td>\n<\/tr>\n
Impacto Charpy sin muesca<\/span><\/td>\n23\u00baC<\/span><\/td>\nISO 179<\/span><\/td>\nN\u00d3TESE BIEN<\/span><\/td>\nkJ\/m\u00b2<\/span><\/td>\n<\/tr>\n
Impacto Charpy sin muesca<\/span><\/td>\n-30\u00b0C<\/span><\/td>\nISO 179<\/span><\/td>\nN\u00d3TESE BIEN<\/span><\/td>\nkJ\/m\u00b2<\/span><\/td>\n<\/tr>\n
Impacto con entalla Charpy<\/span><\/td>\n23\u00b0C\u00a0Complete Destruction\u00a01eA<\/span><\/td>\nISO 179<\/span><\/td>\n6<\/span><\/td>\nkJ\/m\u00b2<\/span><\/td>\n<\/tr>\n
Impacto con entalla Charpy<\/span><\/td>\n-30\u00b0C\u00a0Complete Destruction\u00a01eA<\/span><\/td>\nISO 179<\/span><\/td>\n6<\/span><\/td>\nkJ\/m\u00b2<\/span><\/td>\n<\/tr>\n
T\u00e9rmico<\/span><\/strong><\/td>\nCondici\u00f3n<\/span><\/strong><\/td>\nEst\u00e1ndar<\/span><\/strong><\/td>\nValor<\/span><\/strong><\/td>\nUnidad<\/span><\/strong><\/td>\n<\/tr>\n
HDT<\/span><\/td>\n0,45MPa<\/span><\/td>\nISO 75<\/span><\/td>\n205<\/span><\/td>\n\u00b0C<\/span><\/td>\n<\/tr>\n
HDT<\/span><\/td>\n1,8MPa<\/span><\/td>\nISO 75<\/span><\/td>\n155<\/span><\/td>\n\u00b0C<\/span><\/td>\n<\/tr>\n
Temperatura de fusi\u00f3n<\/span><\/td>\nDSC\u00a0Secondary Temperature Rise<\/span><\/td>\nM\u00c9TODO INTERNO<\/span><\/td>\n340<\/span><\/td>\n\u00b0C<\/span><\/td>\n<\/tr>\n
CLE<\/span><\/td>\nxFlujo 23~55 \u00b0C<\/span><\/td>\nISO 11359<\/span><\/td>\n6E-5<\/span><\/td>\ncm\/cm\/\u00b0C<\/span><\/td>\n<\/tr>\n
Temperatura de ablandamiento Vicat<\/span><\/td>\n10N<\/span><\/td>\nISO 306<\/span><\/td>\n335<\/span><\/td>\n\u00b0C<\/span><\/td>\n<\/tr>\n
Temperatura de ablandamiento Vicat<\/span><\/td>\n50N<\/span><\/td>\nISO 306<\/span><\/td>\n310<\/span><\/td>\n\u00b0C<\/span><\/td>\n<\/tr>\n
Propiedad fisica<\/span><\/strong><\/td>\nCondici\u00f3n<\/span><\/strong><\/td>\nEst\u00e1ndar<\/span><\/strong><\/td>\nValor<\/span><\/strong><\/td>\nUnidad<\/span><\/strong><\/td>\n<\/tr>\n
Absorci\u00f3n de agua<\/span><\/td>\n23\u00baC<\/span><\/td>\nISO 62<\/span><\/td>\n0.5<\/span><\/td>\n%<\/span><\/td>\n<\/tr>\n
Contracci\u00f3n<\/span><\/td>\nFluir<\/span><\/td>\nISO 294<\/span><\/td>\n0.7<\/span><\/td>\n%<\/span><\/td>\n<\/tr>\n
Contracci\u00f3n<\/span><\/td>\nxFlujo<\/span><\/td>\nISO 294<\/span><\/td>\n1.2<\/span><\/td>\n%<\/span><\/td>\n<\/tr>\n
Densidad<\/span><\/td>\n23\u00baC<\/span><\/td>\nISO 1183<\/span><\/td>\n1.3<\/span><\/td>\ngramos\/cm\u00b3<\/span><\/td>\n<\/tr>\n
\u00cdndice de fusi\u00f3n<\/span><\/td>\n380\u00b0C 5kg<\/span><\/td>\nISO 1133<\/span><\/td>\n70<\/span><\/td>\ncm\u00b3\/10min<\/span><\/td>\n<\/tr>\n
Propiedades electricas<\/span><\/strong><\/td>\nCondici\u00f3n<\/span><\/strong><\/td>\nEst\u00e1ndar<\/span><\/strong><\/td>\nValor<\/span><\/strong><\/td>\nUnidad<\/span><\/strong><\/td>\n<\/tr>\n
CTI<\/span><\/td>\n<\/td>\nIEC 60112<\/span><\/td>\n200<\/span><\/td>\nV<\/span><\/td>\n<\/tr>\n
CTI<\/span><\/td>\n100Drops\u00a0SolutionA<\/span><\/td>\nIEC 60112<\/span><\/td>\n175<\/span><\/td>\nV<\/span><\/td>\n<\/tr>\n
Constante diel\u00e9ctrica<\/span><\/td>\n1 kHz<\/span><\/td>\nIEC 60250<\/span><\/td>\n2.9<\/span><\/td>\n<\/td>\n<\/tr>\n
Constante diel\u00e9ctrica<\/span><\/td>\n1 MHz<\/span><\/td>\nIEC 60250<\/span><\/td>\n2.8<\/span><\/td>\n<\/td>\n<\/tr>\n
Constante diel\u00e9ctrica<\/span><\/td>\n50 Hz<\/span><\/td>\nIEC 60250<\/span><\/td>\n2.8<\/span><\/td>\n<\/td>\n<\/tr>\n
Resistividad volum\u00e9trica<\/span><\/td>\n<\/td>\nCEI 60093<\/span><\/td>\n1E15<\/span><\/td>\n\u03a9.cm<\/span><\/td>\n<\/tr>\n
Rigidez diel\u00e9ctrica<\/span><\/td>\nK20\/K20<\/span><\/td>\nCEI 60243<\/span><\/td>\n21<\/span><\/td>\nkilovoltios\/mm<\/span><\/td>\n<\/tr>\n
Rigidez diel\u00e9ctrica<\/span><\/td>\nK20\/P50<\/span><\/td>\nCEI 60243<\/span><\/td>\n25<\/span><\/td>\nkilovoltios\/mm<\/span><\/td>\n<\/tr>\n
Factor de disipaci\u00f3n<\/span><\/td>\n1 kHz<\/span><\/td>\nIEC 60250<\/span><\/td>\n0.003<\/span><\/td>\n<\/td>\n<\/tr>\n
Factor de disipaci\u00f3n<\/span><\/td>\n1 MHz<\/span><\/td>\nIEC 60250<\/span><\/td>\n0.005<\/span><\/td>\n<\/td>\n<\/tr>\n
Resistividad superficial<\/span><\/td>\n<\/td>\nCEI 60093<\/span><\/td>\n1E14<\/span><\/td>\n\u03a9<\/span><\/td>\n<\/tr>\n
Inflamabilidad<\/span><\/strong><\/td>\nCondici\u00f3n<\/span><\/strong><\/td>\nEst\u00e1ndar<\/span><\/strong><\/td>\nValor<\/span><\/strong><\/td>\nUnidad<\/span><\/strong><\/td>\n<\/tr>\n
\u00cdndice limitante de ox\u00edgeno<\/span><\/td>\n3.20mm<\/span><\/td>\nISO 4589<\/span><\/td>\n38<\/span><\/td>\n%<\/span><\/td>\n<\/tr>\n
GWFI<\/span><\/td>\n<\/td>\nIEC 60695<\/span><\/td>\n960<\/span><\/td>\n\u00b0C<\/span><\/td>\n<\/tr>\n
GWFI<\/span><\/td>\n2 mm<\/span><\/td>\nIEC 60695<\/span><\/td>\n875<\/span><\/td>\n\u00b0C<\/span><\/td>\n<\/tr>\n
Clasificaci\u00f3n de llama<\/span><\/td>\n0,8 mm<\/span><\/td>\nUL94<\/span><\/td>\nV-0<\/span><\/td>\n<\/td>\n<\/tr>\n
Clasificaci\u00f3n de llama<\/span><\/td>\n1,6 mm<\/span><\/td>\nUL94<\/span><\/td>\nV-0<\/span><\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

05 | Forming Precautions and Process Optimization Suggestions<\/span><\/h2>\n

 <\/p>\n

Drying management:<\/strong> It is recommended to dry the material at 150\u00b0C for 3 hours before processing to avoid air bubbles and silver streaks.<\/span><\/p>\n

Injection molding parameters:<\/strong> The screw speed should be moderate, and the back pressure should not be too high to prevent degradation.<\/span><\/p>\n

Mold material selection:<\/strong> It is recommended to use polished surfaces or chrome-plated mold cavities to prevent resin adhesion.<\/span><\/p>\n

Demolding Angle:<\/strong> It is advisable to be greater than 0.5\u00b0 to enhance the surface quality of the workpiece and the stability of molding.<\/span><\/p>\n

Holding pressure strategy:<\/strong> Controlling the crystallization rate during the holding pressure stage can reduce warpage and shrinkage differences.<\/span><\/p>\n

 <\/p>\n

06 | Supply and Technical Support Advantages of Juyuan<\/span><\/h2>\n

 <\/p>\n

Original factory channel guarantee:<\/strong> Long-term cooperation with Evonik to ensure material traceability.<\/span><\/p>\n

Process support services:<\/strong> Provide suggestions for mold debugging and injection molding parameter optimization.<\/span><\/p>\n

International logistics system:<\/strong> Multi-country export experience, quick response to customer demands.<\/span><\/p>\n

Complete technical documentation:<\/strong> Provide physical property tables, MSDS, RoHS and FDA certification documents.<\/span><\/p>\n

 <\/p>\n

07 | Recommendations for Similar Materials<\/span><\/h2>\n

 <\/p>\n

\n\n\n\n\n\n\n\n\n
Modelo de producto<\/span><\/strong><\/td>\nDescripci\u00f3n<\/span><\/strong><\/td>\nPeso espec\u00edfico<\/span><\/strong><\/td>\nMelt Flow Index<\/span><\/strong><\/td>\nResistencia a la tracci\u00f3n<\/span><\/strong><\/td>\nAlargamiento<\/span><\/strong><\/td>\nContracci\u00f3n<\/span><\/strong><\/td>\nTemperatura de fusi\u00f3n<\/span><\/strong><\/td>\nM\u00f3dulo de tracci\u00f3n<\/span><\/strong><\/td>\nTemperatura de deflexi\u00f3n t\u00e9rmica.<\/span><\/strong><\/td>\nVicat Softening Temp.<\/span><\/strong><\/td>\nM\u00f3dulo de flexi\u00f3n<\/span><\/strong><\/td>\nCoefficient of Linear Expansion<\/span><\/strong><\/td>\nResistencia a la flexi\u00f3n<\/span><\/strong><\/td>\nSummary<\/span><\/strong><\/td>\n<\/tr>\n
3300G<\/span><\/td>\nMaterial Features:\u00a0Non-reinforced<\/span>
\nApplications:\u00a0Industrial use \u2022 Electrical wires & cables<\/span><\/td>\n		1.30 g\/cm\u00b3<\/span><\/td>\n20 cm\u00b3\/10min<\/span><\/td>\n98 MPa<\/span><\/td>\n5%<\/span><\/td>\n0.70%<\/span><\/td>\n340 \u00b0C<\/span><\/td>\n3600 MPa<\/span><\/td>\n205 \u00b0C<\/span><\/td>\n335 \u00b0C<\/span><\/td>\n\u2014<\/span><\/td>\n6E-5 cm\/cm\/\u00b0C<\/span><\/td>\n\u2014<\/span><\/td>\nViscosity:\u00a0MediumFlame Rating:\u00a0V-1 \u2022 V-0<\/span><\/p>\n

Notched Impact:\u00a06 kJ\/m\u00b2<\/span><\/td>\n<\/tr>\n

ZV7402<\/span><\/td>\n\u2014<\/span><\/td>\n1.30 g\/cm\u00b3<\/span><\/td>\n65 cm\u00b3\/10min<\/span><\/td>\n80 MPa<\/span><\/td>\n7%<\/span><\/td>\n\u2014<\/span><\/td>\n\u2014<\/span><\/td>\n3500 MPa<\/span><\/td>\n\u2014<\/span><\/td>\n\u2014<\/span><\/td>\n3500 MPa<\/span><\/td>\n\u2014<\/span><\/td>\n150 MPa<\/span><\/td>\nNotched Impact:\u00a05 kJ\/m\u00b2<\/span><\/td>\n<\/tr>\n
L4000G<\/span><\/td>\nMaterial Features:\u00a0Non-reinforced<\/span>
\nApplications:\u00a0Gears \u2022 Mechanical parts \u2022 Medical applications \u2022 Films \u2022 Sheets<\/span><\/td>\n		1.30 g\/cm\u00b3<\/span><\/td>\n11 cm\u00b3\/10min<\/span><\/td>\n96 MPa<\/span><\/td>\n5%<\/span><\/td>\n1.10%<\/span><\/td>\n340 \u00b0C<\/span><\/td>\n3500 MPa<\/span><\/td>\n205 \u00b0C<\/span><\/td>\n335 \u00b0C<\/span><\/td>\n\u2014<\/span><\/td>\n6E-5 cm\/cm\/\u00b0C<\/span><\/td>\n\u2014<\/span><\/td>\nViscosity:\u00a0HighFlame Rating:\u00a0V-1 \u2022 V-0<\/span><\/p>\n

Notched Impact:\u00a07 kJ\/m\u00b2<\/span><\/td>\n<\/tr>\n

ZV7401 Natural<\/span><\/td>\n\u2014<\/span><\/td>\n1.30 g\/cm\u00b3<\/span><\/td>\n83 cm\u00b3\/10min<\/span><\/td>\n75 MPa<\/span><\/td>\n6%<\/span><\/td>\n\u2014<\/span><\/td>\n\u2014<\/span><\/td>\n3800 MPa<\/span><\/td>\n\u2014<\/span><\/td>\n\u2014<\/span><\/td>\n3500 MPa<\/span><\/td>\n\u2014<\/span><\/td>\n150 MPa<\/span><\/td>\nNotched Impact:\u00a05 kJ\/m\u00b2<\/span><\/td>\n<\/tr>\n
ZV7403<\/span><\/td>\n\u2014<\/span><\/td>\n1.30 g\/cm\u00b3<\/span><\/td>\n18 cm\u00b3\/10min<\/span><\/td>\n80 MPa<\/span><\/td>\n7%<\/span><\/td>\n\u2014<\/span><\/td>\n\u2014<\/span><\/td>\n3600 MPa<\/span><\/td>\n\u2014<\/span><\/td>\n\u2014<\/span><\/td>\n3300 MPa<\/span><\/td>\n\u2014<\/span><\/td>\n140 MPa<\/span><\/td>\nNotched Impact:\u00a07 kJ\/m\u00b2<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

 <\/p>\n

08 | Conclusion: PEEK selection that emphasizes both stable processing and high cleanliness<\/span><\/h2>\n

 <\/p>\n

VESTAKEEP\u00ae 2000G does not win by its extreme performance, but has established a reliable reputation in the medical and semiconductor fields with its three characteristics of \"stable molding, flame retardant safety, and clean controllability\".<\/span><\/p>\n

For manufacturers seeking high-precision injection molding materials, it is not merely a raw material but also a long-term and stable process solution.<\/span><\/p>\n

Juyuan will continue to provide customers with the most competitive PEEK supply and application guidance through global channels and professional support.<\/span><\/p>\n

\"plastic<\/p>\n

 <\/p>\n

 <\/p>\n

\u3010Recomendaciones relacionadas\u3011<\/strong><\/span><\/h2>\n

 <\/p>\n

\n

ColorRx\u00ae PEEK-3000RX:<\/a> Medical-Grade peek raw material for Advanced Healthcare <\/span>M\u00e1s informaci\u00f3n><\/span><\/a><\/p>\n

\n

VESTAKEEP\u00ae PEEK 2000GF30:<\/a> Natural PEEK for High-Rigidity Structural Applications M\u00e1s informaci\u00f3n><\/span><\/a><\/span><\/span><\/span><\/p>\n

\n

The Role of Plastic Raw Materials in Fishing Nets:<\/a> A Deep Dive into PA6 <\/span>M\u00e1s informaci\u00f3n><\/span><\/a><\/p>\n

\n<\/div>\n

 <\/p>","protected":false},"excerpt":{"rendered":"

Why Choose VESTAKEEP\u00ae 2000G   Among engineering plastics, PEEK is renowned for its heat resistance and chemical stability, but the processability varies significantly among different grades. VESTAKEEP\u00ae 2000G precisely controls the molecular weight distribution, enabling the material to maintain mechanical toughness and flame retardancy while also having ideal flow performance and demolding performance. For manufacturers […]<\/p>\n","protected":false},"author":1,"featured_media":4343,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[77],"tags":[78],"class_list":["post-4545","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-polyether-ether-ketone","tag-peek"],"jetpack_featured_media_url":"https:\/\/juyuans.com\/wp-content\/uploads\/2025\/09\/PEEK-24.jpg","_links":{"self":[{"href":"https:\/\/juyuans.com\/es\/wp-json\/wp\/v2\/posts\/4545","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/juyuans.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/juyuans.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/juyuans.com\/es\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/juyuans.com\/es\/wp-json\/wp\/v2\/comments?post=4545"}],"version-history":[{"count":1,"href":"https:\/\/juyuans.com\/es\/wp-json\/wp\/v2\/posts\/4545\/revisions"}],"predecessor-version":[{"id":4547,"href":"https:\/\/juyuans.com\/es\/wp-json\/wp\/v2\/posts\/4545\/revisions\/4547"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/juyuans.com\/es\/wp-json\/wp\/v2\/media\/4343"}],"wp:attachment":[{"href":"https:\/\/juyuans.com\/es\/wp-json\/wp\/v2\/media?parent=4545"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/juyuans.com\/es\/wp-json\/wp\/v2\/categories?post=4545"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/juyuans.com\/es\/wp-json\/wp\/v2\/tags?post=4545"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}