{"id":3554,"date":"2025-08-16T02:43:46","date_gmt":"2025-08-16T02:43:46","guid":{"rendered":"https:\/\/juyuans.com\/?p=3554"},"modified":"2025-08-16T02:45:41","modified_gmt":"2025-08-16T02:45:41","slug":"xenoy-6370-high-toughness-ductile-pcpbt-plastic","status":"publish","type":"post","link":"https:\/\/juyuans.com\/es\/xenoy-6370-high-toughness-ductile-pcpbt-plastic\/","title":{"rendered":"XENOY\u2122 6370: High-Toughness, Ductile PC+PBT Plastic"},"content":{"rendered":"

What is XENOY\u2122 6370<\/span><\/h1>\n

 <\/p>\n

When sourcing engineering plastics, decision-makers rarely look at strength alone. Toughness, dimensional control, and the way a material behaves in processing all weigh into the choice. For many buyers, XENOY\u2122 6370 (PC+PBT, glass fiber reinforced)<\/strong> has become a practical solution. It combines polycarbonate and polybutylene terephthalate, is reinforced with 30% glass fiber, and is impact-modified\u2014giving it an unusual mix of stiffness and ductility that is hard to achieve with single polymers.<\/span><\/p>\n

\"XENOY\u2122<\/p>\n

 <\/p>\n

01 | Material Highlights<\/span><\/h2>\n

 <\/p>\n

    \n
  • \n

    Structural stability with reinforcement<\/strong><\/span>
    With 30% glass fiber, the grade holds its shape under load and resists creep, which is particularly useful in parts exposed to constant stress.<\/span><\/p>\n<\/li>\n

  • \n

    Ductility and toughness<\/strong><\/span>
    Unlike some rigid plastics that tend to crack under shock, this material can flex without breaking. Even in low-temperature environments, it resists brittle failure. That makes it workable for snap-fit designs and thin-walled parts where breakage risk is high.<\/span><\/p>\n<\/li>\n

  • \n

    Thermal resistance<\/strong><\/span>
    Mechanical properties remain reliable at elevated temperatures, so it is often chosen for components located near heat sources such as engine compartments or power electronics housings.<\/span><\/p>\n<\/li>\n

  • \n

    Electrical insulation<\/strong><\/span>
    Its dielectric strength and volume resistivity make it dependable for switches, connectors, and other current-carrying parts.<\/span><\/p>\n<\/li>\n

  • \n

    Dimensional precision<\/strong><\/span>
    The relatively low shrinkage rate helps manufacturers hold tighter tolerances in injection molding. Complex molds and assemblies benefit directly from this.<\/span><\/p>\n<\/li>\n<\/ul>\n

     <\/p>\n

    02 | Typical Applications<\/span><\/h2>\n

     <\/p>\n

      \n
    • \n

      Automotive<\/strong> \u2013 bumper frames, under-hood components, brackets, battery module housings.<\/span><\/p>\n<\/li>\n

    • \n

      Electrical & electronics<\/strong> \u2013 switches, connectors, insulation covers.<\/span><\/p>\n<\/li>\n

    • \n

      Industrial equipment<\/strong> \u2013 gears, shields, and other parts where both impact and chemical resistance are needed.<\/span><\/p>\n<\/li>\n

    • \n

      Consumer products<\/strong> \u2013 sturdy yet lightweight housings that improve user safety and product lifetime.<\/span><\/p>\n<\/li>\n<\/ul>\n

       <\/p>\n

      03 | XENOY\u2122 6370 Data Sheet<\/span><\/h2>\n

       <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
      UL<\/span><\/strong><\/td>\nCondici\u00f3n<\/span><\/strong><\/td>\nEst\u00e1ndar<\/span><\/strong><\/td>\nValor<\/span><\/strong><\/td>\nUnidad<\/span><\/strong><\/td>\n<\/tr>\n
      CTI<\/span><\/td>\n<\/td>\nIEC 60112<\/span><\/td>\n2<\/span><\/td>\nSOCIEDAD AN\u00d3NIMA<\/span><\/td>\n<\/tr>\n
      Hola<\/span><\/td>\nTodos los colores 1,5 mm<\/span><\/td>\nUL 746A<\/span><\/td>\n3<\/span><\/td>\nSOCIEDAD AN\u00d3NIMA<\/span><\/td>\n<\/tr>\n
      Hola<\/span><\/td>\nTodos los colores 3,0 mm<\/span><\/td>\nUL 746A<\/span><\/td>\n3<\/span><\/td>\nSOCIEDAD AN\u00d3NIMA<\/span><\/td>\n<\/tr>\n
      Alta Velocidad<\/span><\/td>\n<\/td>\nUL 746A<\/span><\/td>\n1<\/span><\/td>\nSOCIEDAD AN\u00d3NIMA<\/span><\/td>\n<\/tr>\n
      HWI<\/span><\/td>\nTodos los colores 1,5 mm<\/span><\/td>\nUL 746A<\/span><\/td>\n2<\/span><\/td>\nSOCIEDAD AN\u00d3NIMA<\/span><\/td>\n<\/tr>\n
      HWI<\/span><\/td>\nTodos los colores 3,0 mm<\/span><\/td>\nUL 746A<\/span><\/td>\n1<\/span><\/td>\nSOCIEDAD AN\u00d3NIMA<\/span><\/td>\n<\/tr>\n
      RTI<\/span><\/td>\nElec Todos los colores 1,5 mm<\/span><\/td>\nUL 746B<\/span><\/td>\n140<\/span><\/td>\n\u00b0C<\/span><\/td>\n<\/tr>\n
      RTI<\/span><\/td>\nElec Todos los colores 3,0 mm<\/span><\/td>\nUL 746B<\/span><\/td>\n140<\/span><\/td>\n\u00b0C<\/span><\/td>\n<\/tr>\n
      RTI<\/span><\/td>\nImp Todos los colores 1,5 mm<\/span><\/td>\nUL 746B<\/span><\/td>\n130<\/span><\/td>\n\u00b0C<\/span><\/td>\n<\/tr>\n
      RTI<\/span><\/td>\nImp todo color 3,0 mm<\/span><\/td>\nUL 746B<\/span><\/td>\n130<\/span><\/td>\n\u00b0C<\/span><\/td>\n<\/tr>\n
      RTI<\/span><\/td>\nStr Todos los colores 1,5 mm<\/span><\/td>\nUL 746B<\/span><\/td>\n140<\/span><\/td>\n\u00b0C<\/span><\/td>\n<\/tr>\n
      RTI<\/span><\/td>\nCadena todo color 3,0 mm<\/span><\/td>\nUL 746B<\/span><\/td>\n140<\/span><\/td>\n\u00b0C<\/span><\/td>\n<\/tr>\n
      Resistividad volum\u00e9trica<\/span><\/td>\n<\/td>\nNorma ASTM D257<\/span><\/td>\n1E15<\/span><\/td>\n\u03a9.cm<\/span><\/td>\n<\/tr>\n
      Estabilidad dimensional<\/span><\/td>\n<\/td>\nUL746<\/span><\/td>\n0.0<\/span><\/td>\n%<\/span><\/td>\n<\/tr>\n
      Rigidez diel\u00e9ctrica<\/span><\/td>\n<\/td>\nNorma ASTM D149<\/span><\/td>\n38<\/span><\/td>\nkilovoltios\/mm<\/span><\/td>\n<\/tr>\n
      Resistencia al arco<\/span><\/td>\n<\/td>\nASTM D495<\/span><\/td>\n5<\/span><\/td>\nSOCIEDAD AN\u00d3NIMA<\/span><\/td>\n<\/tr>\n
      Clasificaci\u00f3n de llama<\/span><\/td>\nTodos los colores 1,5 mm<\/span><\/td>\nUL94<\/span><\/td>\nmedia pensi\u00f3n<\/span><\/td>\n<\/td>\n<\/tr>\n
      Clasificaci\u00f3n de llama<\/span><\/td>\nTodos los colores 3,0 mm<\/span><\/td>\nUL94<\/span><\/td>\nmedia pensi\u00f3n<\/span><\/td>\n<\/td>\n<\/tr>\n
      Comportamiento mec\u00e1nico<\/span><\/strong><\/td>\nCondici\u00f3n<\/span><\/strong><\/td>\nEst\u00e1ndar<\/span><\/strong><\/td>\nValor<\/span><\/strong><\/td>\nUnidad<\/span><\/strong><\/td>\n<\/tr>\n
      Alargamiento<\/span><\/td>\nYield\u00a05mm\/min<\/span><\/td>\nNorma ASTM D638<\/span><\/td>\n3<\/span><\/td>\n%<\/span><\/td>\n<\/tr>\n
      Alargamiento<\/span><\/td>\nYield\u00a05mm\/min<\/span><\/td>\nISO 527<\/span><\/td>\n3<\/span><\/td>\n%<\/span><\/td>\n<\/tr>\n
      Alargamiento<\/span><\/td>\nRotura de 5 mm\/min<\/span><\/td>\nNorma ASTM D638<\/span><\/td>\n4<\/span><\/td>\n%<\/span><\/td>\n<\/tr>\n
      Alargamiento<\/span><\/td>\nRotura de 5 mm\/min<\/span><\/td>\nISO 527<\/span><\/td>\n3<\/span><\/td>\n%<\/span><\/td>\n<\/tr>\n
      Resistencia a la flexi\u00f3n<\/span><\/td>\nYield\u00a01.3mm\/min<\/span><\/td>\nNorma ASTM D790<\/span><\/td>\n150<\/span><\/td>\nMPa<\/span><\/td>\n<\/tr>\n
      Resistencia a la flexi\u00f3n<\/span><\/td>\nYield\u00a02.0mm\/min<\/span><\/td>\nISO 178<\/span><\/td>\n154<\/span><\/td>\nMPa<\/span><\/td>\n<\/tr>\n
      Resistencia a la flexi\u00f3n<\/span><\/td>\nRotura de 1,3 mm\/min<\/span><\/td>\nNorma ASTM D790<\/span><\/td>\n138<\/span><\/td>\nMPa<\/span><\/td>\n<\/tr>\n
      M\u00f3dulo de flexi\u00f3n<\/span><\/td>\n1,3 mm\/min<\/span><\/td>\nNorma ASTM D790<\/span><\/td>\n5370<\/span><\/td>\nMPa<\/span><\/td>\n<\/tr>\n
      M\u00f3dulo de flexi\u00f3n<\/span><\/td>\n2,0 mm\/min<\/span><\/td>\nISO 178<\/span><\/td>\n7750<\/span><\/td>\nMPa<\/span><\/td>\n<\/tr>\n
      Impacto sin muescas Izod<\/span><\/td>\n23\u00baC<\/span><\/td>\nASTM D4812<\/span><\/td>\n65.30<\/span><\/td>\nkJ\/m\u00b2<\/span><\/td>\n<\/tr>\n
      Impacto de muesca Izod<\/span><\/td>\n23\u00baC<\/span><\/td>\nNorma ASTM D256<\/span><\/td>\n17.34<\/span><\/td>\nkJ\/m\u00b2<\/span><\/td>\n<\/tr>\n
      Impacto de muesca Izod<\/span><\/td>\n23 \u00b0C 4,0 mm<\/span><\/td>\nISO 180<\/span><\/td>\n10<\/span><\/td>\nkJ\/m\u00b2<\/span><\/td>\n<\/tr>\n
      Impacto de muesca Izod<\/span><\/td>\n-30\u00b0C<\/span><\/td>\nNorma ASTM D256<\/span><\/td>\n11.42<\/span><\/td>\nkJ\/m\u00b2<\/span><\/td>\n<\/tr>\n
      Impacto de muesca Izod<\/span><\/td>\n-30\u00b0C 4.0mm<\/span><\/td>\nISO 180<\/span><\/td>\n6<\/span><\/td>\nkJ\/m\u00b2<\/span><\/td>\n<\/tr>\n
      Resistencia a la tracci\u00f3n<\/span><\/td>\nRotura de 5 mm\/min<\/span><\/td>\nNorma ASTM D638<\/span><\/td>\n91<\/span><\/td>\nMPa<\/span><\/td>\n<\/tr>\n
      Resistencia a la tracci\u00f3n<\/span><\/td>\nRotura de 5 mm\/min<\/span><\/td>\nISO 527<\/span><\/td>\n105<\/span><\/td>\nMPa<\/span><\/td>\n<\/tr>\n
      Resistencia a la tracci\u00f3n<\/span><\/td>\nYield\u00a05mm\/min<\/span><\/td>\nNorma ASTM D638<\/span><\/td>\n97<\/span><\/td>\nMPa<\/span><\/td>\n<\/tr>\n
      Resistencia a la tracci\u00f3n<\/span><\/td>\nYield\u00a05mm\/min<\/span><\/td>\nISO 527<\/span><\/td>\n105<\/span><\/td>\nMPa<\/span><\/td>\n<\/tr>\n
      M\u00f3dulo de tracci\u00f3n<\/span><\/td>\n1,0 mm\/min<\/span><\/td>\nISO 527<\/span><\/td>\n8500<\/span><\/td>\nMPa<\/span><\/td>\n<\/tr>\n
      M\u00f3dulo de tracci\u00f3n<\/span><\/td>\n5mm\/min<\/span><\/td>\nNorma ASTM D638<\/span><\/td>\n9750<\/span><\/td>\nMPa<\/span><\/td>\n<\/tr>\n
      Impacto con entalla Charpy<\/span><\/td>\n23 \u00b0C 4,0 mm<\/span><\/td>\nISO 179<\/span><\/td>\n9<\/span><\/td>\nkJ\/m\u00b2<\/span><\/td>\n<\/tr>\n
      T\u00e9rmico<\/span><\/strong><\/td>\nCondici\u00f3n<\/span><\/strong><\/td>\nEst\u00e1ndar<\/span><\/strong><\/td>\nValor<\/span><\/strong><\/td>\nUnidad<\/span><\/strong><\/td>\n<\/tr>\n
      HDT<\/span><\/td>\n1,8 MPa 4,0 mm<\/span><\/td>\nISO 75<\/span><\/td>\n155<\/span><\/td>\n\u00b0C<\/span><\/td>\n<\/tr>\n
      HDT<\/span><\/td>\nSin recocer 0,45 MPa 6,4 mm<\/span><\/td>\nNorma ASTM D648<\/span><\/td>\n204<\/span><\/td>\n\u00b0C<\/span><\/td>\n<\/tr>\n
      HDT<\/span><\/td>\nSin recocer 1,8 MPa 6,4 mm<\/span><\/td>\nNorma ASTM D648<\/span><\/td>\n149<\/span><\/td>\n\u00b0C<\/span><\/td>\n<\/tr>\n
      CLE<\/span><\/td>\nFlujo -40,0~40 \u00b0C<\/span><\/td>\nNorma ASTM E831<\/span><\/td>\n2.7E-5<\/span><\/td>\ncm\/cm\/\u00b0C<\/span><\/td>\n<\/tr>\n
      CLE<\/span><\/td>\nFlujo -40,0~40 \u00b0C<\/span><\/td>\nISO 11359<\/span><\/td>\n2.7E-5<\/span><\/td>\ncm\/cm\/\u00b0C<\/span><\/td>\n<\/tr>\n
      CLE<\/span><\/td>\nFlujo 60~138\u00b0C<\/span><\/td>\nNorma ASTM E831<\/span><\/td>\n1.98E-5<\/span><\/td>\ncm\/cm\/\u00b0C<\/span><\/td>\n<\/tr>\n
      CLE<\/span><\/td>\nxFlow\u00a0-40.0~40\u00b0C<\/span><\/td>\nNorma ASTM E831<\/span><\/td>\n1.1E-4<\/span><\/td>\ncm\/cm\/\u00b0C<\/span><\/td>\n<\/tr>\n
      CLE<\/span><\/td>\nxFlow\u00a0-40.0~40\u00b0C<\/span><\/td>\nISO 11359<\/span><\/td>\n1.1E-4<\/span><\/td>\ncm\/cm\/\u00b0C<\/span><\/td>\n<\/tr>\n
      Temperatura de ablandamiento Vicat<\/span><\/td>\n50 \u00b0C\/h 50 N<\/span><\/td>\nNorma ASTM D1525<\/span><\/td>\n153<\/span><\/td>\n\u00b0C<\/span><\/td>\n<\/tr>\n
      Temperatura de ablandamiento Vicat<\/span><\/td>\n50 \u00b0C\/h 50 N<\/span><\/td>\nISO 306<\/span><\/td>\n148<\/span><\/td>\n\u00b0C<\/span><\/td>\n<\/tr>\n
      Temperatura de ablandamiento Vicat<\/span><\/td>\n120 \u00b0C\/h 50 N<\/span><\/td>\nISO 306<\/span><\/td>\n150<\/span><\/td>\n\u00b0C<\/span><\/td>\n<\/tr>\n
      Propiedad fisica<\/span><\/strong><\/td>\nCondici\u00f3n<\/span><\/strong><\/td>\nEst\u00e1ndar<\/span><\/strong><\/td>\nValor<\/span><\/strong><\/td>\nUnidad<\/span><\/strong><\/td>\n<\/tr>\n
      Absorci\u00f3n de agua<\/span><\/td>\n24 horas<\/span><\/td>\nNorma ASTM D570<\/span><\/td>\n0.09<\/span><\/td>\n%<\/span><\/td>\n<\/tr>\n
      Absorci\u00f3n de agua<\/span><\/td>\nSaturaci\u00f3n de 23 \u00b0C<\/span><\/td>\nISO 62<\/span><\/td>\n0.5<\/span><\/td>\n%<\/span><\/td>\n<\/tr>\n
      Absorci\u00f3n de agua<\/span><\/td>\n23 \u00b0C 50HR<\/span><\/td>\nISO 62<\/span><\/td>\n0.15<\/span><\/td>\n%<\/span><\/td>\n<\/tr>\n
      Contracci\u00f3n<\/span><\/td>\nFlow\u00a00.75-2.30mm<\/span><\/td>\nM\u00c9TODO INTERNO<\/span><\/td>\n0.3~0.4<\/span><\/td>\n%<\/span><\/td>\n<\/tr>\n
      Contracci\u00f3n<\/span><\/td>\nFlow\u00a02.3-4.6mm<\/span><\/td>\nM\u00c9TODO INTERNO<\/span><\/td>\n0.4~0.5<\/span><\/td>\n%<\/span><\/td>\n<\/tr>\n
      Contracci\u00f3n<\/span><\/td>\nxFlow\u00a00.75-2.30mm<\/span><\/td>\nM\u00c9TODO INTERNO<\/span><\/td>\n0.4~0.7<\/span><\/td>\n%<\/span><\/td>\n<\/tr>\n
      Contracci\u00f3n<\/span><\/td>\nxFlow\u00a02.3-4.6mm<\/span><\/td>\nM\u00c9TODO INTERNO<\/span><\/td>\n0.7~0.9<\/span><\/td>\n%<\/span><\/td>\n<\/tr>\n
      Volumen espec\u00edfico<\/span><\/td>\n<\/td>\nNorma ASTM D792<\/span><\/td>\n0.7<\/span><\/td>\ncm\u00b3\/g<\/span><\/td>\n<\/tr>\n
      Densidad<\/span><\/td>\n<\/td>\nNorma ASTM D792<\/span><\/td>\n1.44<\/span><\/td>\ngramos\/cm\u00b3<\/span><\/td>\n<\/tr>\n
      Densidad<\/span><\/td>\n<\/td>\nISO 1183<\/span><\/td>\n1.44<\/span><\/td>\ngramos\/cm\u00b3<\/span><\/td>\n<\/tr>\n
      \u00cdndice de fusi\u00f3n<\/span><\/td>\n250\u00b0C 5 kg<\/span><\/td>\nNorma ASTM D1238<\/span><\/td>\n24<\/span><\/td>\ng\/10min<\/span><\/td>\n<\/tr>\n
      \u00cdndice de fusi\u00f3n<\/span><\/td>\n250\u00b0C 5 kg<\/span><\/td>\nISO 1133<\/span><\/td>\n12<\/span><\/td>\ncm\u00b3\/10min<\/span><\/td>\n<\/tr>\n
      \u00cdndice de fusi\u00f3n<\/span><\/td>\n265\u00b0C 5kg<\/span><\/td>\nISO 1133<\/span><\/td>\n19<\/span><\/td>\ncm\u00b3\/10min<\/span><\/td>\n<\/tr>\n
      Propiedades electricas<\/span><\/strong><\/td>\nCondici\u00f3n<\/span><\/strong><\/td>\nEst\u00e1ndar<\/span><\/strong><\/td>\nValor<\/span><\/strong><\/td>\nUnidad<\/span><\/strong><\/td>\n<\/tr>\n
      Constante diel\u00e9ctrica<\/span><\/td>\n1 MHz<\/span><\/td>\nNorma ASTM D150<\/span><\/td>\n4<\/span><\/td>\n<\/td>\n<\/tr>\n
      Constante diel\u00e9ctrica<\/span><\/td>\n100 Hz<\/span><\/td>\nNorma ASTM D150<\/span><\/td>\n4<\/span><\/td>\n<\/td>\n<\/tr>\n
      Resistividad volum\u00e9trica<\/span><\/td>\n<\/td>\nNorma ASTM D257<\/span><\/td>\n4.8E+15<\/span><\/td>\n\u03a9.cm<\/span><\/td>\n<\/tr>\n
      Factor de disipaci\u00f3n<\/span><\/td>\n1 MHz<\/span><\/td>\nNorma ASTM D150<\/span><\/td>\n0.02<\/span><\/td>\n<\/td>\n<\/tr>\n
      Factor de disipaci\u00f3n<\/span><\/td>\n100 Hz<\/span><\/td>\nNorma ASTM D150<\/span><\/td>\n0.003<\/span><\/td>\n<\/td>\n<\/tr>\n
      Dureza<\/span><\/strong><\/td>\nCondici\u00f3n<\/span><\/strong><\/td>\nEst\u00e1ndar<\/span><\/strong><\/td>\nValor<\/span><\/strong><\/td>\nUnidad<\/span><\/strong><\/td>\n<\/tr>\n
      Dureza Rockwell<\/span><\/td>\nR(Escala)<\/span><\/td>\nNorma ASTM D785<\/span><\/td>\n109<\/span><\/td>\n<\/td>\n<\/tr>\n
      Inflamabilidad<\/span><\/strong><\/td>\nCondici\u00f3n<\/span><\/strong><\/td>\nEst\u00e1ndar<\/span><\/strong><\/td>\nValor<\/span><\/strong><\/td>\nUnidad<\/span><\/strong><\/td>\n<\/tr>\n
      Clasificaci\u00f3n de llama<\/span><\/td>\nTodos los colores 1,5 mm<\/span><\/td>\nUL94<\/span><\/td>\nmedia pensi\u00f3n<\/span><\/td>\n<\/td>\n<\/tr>\n
      Clasificaci\u00f3n de llama<\/span><\/td>\nTodos los colores 3,0 mm<\/span><\/td>\nUL94<\/span><\/td>\nmedia pensi\u00f3n<\/span><\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

      Looking for the full datasheet? Contact us for more technical information.<\/em><\/p>\n

       <\/p>\n

      04 | Processing and Compatibility<\/span><\/h2>\n

       <\/p>\n

      The grade is designed for injection molding and shows a reasonable compromise between flow and strength. For high-volume production, this means fewer trade-offs between cycle time and part quality. Shrinkage is low, so parts stay closer to design dimensions. In mass production runs, the stability of this material reduces reject rates, which matters directly to cost control.<\/span><\/p>\n

       <\/p>\n

      05 | Why it Stands Out<\/span><\/h2>\n

       <\/p>\n

      Compared with using PC or PBT on their own, XENOY\u2122 6370 brings together the ductility of PC, the chemical resistance of PBT, and the rigidity of glass fiber reinforcement. <\/span><\/p>\n

      Engineers also point out its adaptability: it performs in hot, cold, and humid conditions. <\/span><\/p>\n

      In many applications it can even replace metal or more expensive engineering plastics, bringing both weight reduction and cost savings. <\/span><\/p>\n

      This is one reason it is frequently specified in automotive lightweighting projects and in electrification components.<\/span><\/p>\n

       <\/p>\n

      06 | FAQ<\/span><\/h2>\n

       <\/p>\n

      Q1: Can it be used outdoors?<\/strong><\/span>
      It tolerates some outdoor conditions. However, for continuous exposure, UV-stabilized versions or protective coatings are recommended.<\/span><\/p>\n

      Q2: What advantage does it have over metal parts?<\/strong><\/span>
      It is lighter, easier to process, and usually more economical\u2014while still meeting structural requirements in many cases.<\/span><\/p>\n

      Q3: Is it suitable for electric vehicle parts?<\/strong><\/span>
      Yes. Its insulation and heat stability make it a natural fit for battery brackets, connectors, and related modules.<\/span><\/p>\n

       <\/p>\n

      07 | Why Work with Juyuan<\/span><\/h2>\n

       <\/p>\n

      For buyers, material quality is only half the story\u2014supply security matters just as much. Juyuan has been active in the international plastics trade for 24 years and offers:<\/span><\/p>\n